Netra 240 not booting



Hi All,

I'm having a problem booting a Netra 240 running Solaris 10.

I get the following output:

ok boot disk
Boot device: /pci@1c,600000/scsi@2/disk@0,0 File and args:

Can't open boot device

ok probe-ide
Device 0 ( Primary Master )
Removable ATAPI Model: TSSTcorpCD/DVDW TS-L532U

Device 1 ( Primary Slave )
Not Present

Device 2 ( Secondary Master )
Not Present

Device 3 ( Secondary Slave )
Not Present

ok probe-scsi
ok

I think there is a hardware failure here, since when I probe the IDE bus
and the SCSI bus I only find the CDROM drive and not the HDD.

Please confirm my suspision and suggest a course of action...

Thank you,
Leith
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers



Relevant Pages

  • Re: Can read/open disk label/boot device. Broken DVD?
    ... When booting boot cdrom, recieve message "cant open boot device" ... But is detected as device 0 when probe-ide is entered. ... If you have a Sunfire V210, disks are scsi not ide, cd/dvd player is ide. ...
    (comp.sys.sun.hardware)
  • Re: Solaris install on cdrom-less netra
    ... I plugged in an LG burner as the secondary master. ... probe-ide-all shows the device as Device 2,, ... can't read disk label package ... Can't open boot device. ...
    (comp.sys.sun.hardware)
  • How to check what hardware is available?
    ... I switched to the boot prompted and typed probe-ide. ... Device 2 (Secondary Master) ... Target 0 ... Unit 0 Disk SEAGATE ST336607LSUN36G 0507 ...
    (comp.sys.sun.admin)