issues with cluster 3.2
- From: Ayaz Anjum <anjum@xxxxxxxxx>
- Date: Fri, 25 May 2007 19:27:57 +0300
HI !
I am evaluating sun cluster 3.2 and facing following wierd issues (
solaris 10 11/06 )
1. While installing i have specified a non default private interconnect ip
addresses ( 10.20.0.0)
Cluster nodes boots up fine but then i get following messages
first node - orarac01
May 25 16:32:29 orarac01 ip: [ID 903730 kern.warning] WARNING: IP:
Hardware address '00:00:00:00:00:01' trying to be our address
010.020.004.001!
second node =- orarac02
May 25 17:12:28 orarac02 ip: [ID 903730 kern.warning] WARNING: IP:
Hardware address '00:00:00:00:00:02' trying to be our address
010.020.004.002!
I am using ce3 and ce7 for cluster interconect and i see following on both
nodes
orarac01:
ce3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500
index 5
inet 10.20.0.129 netmask ffffff80 broadcast 10.20.0.255
ether 0:3:ba:db:9d:a3
ce7: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500
index 4
inet 10.20.1.1 netmask ffffff80 broadcast 10.20.1.127
ether 0:3:ba:3:7b:2e
clprivnet0:
flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu
1500 index 6
inet 10.20.4.1 netmask fffffe00 broadcast 10.20.5.255
ether 0:0:0:0:0:1
orarac02:
ce3: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500
index 4
inet 10.20.0.130 netmask ffffff80 broadcast 10.20.0.255
ether 0:3:ba:db:6c:af
ce7: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500
index 3
inet 10.20.1.2 netmask ffffff80 broadcast 10.20.1.127
ether 0:3:ba:3:bb:52
clprivnet0:
flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu
1500 index 5
inet 10.20.4.2 netmask fffffe00 broadcast 10.20.5.255
ether 0:0:0:0:0:2
i dont see and address conflict in above ifconfig output, but from the
messages the nodes are complaining about the other member.
Using the new feature of cluster 3.2, i booted in non cluster mode, and
did clsetup to change the private ip address to default range but it gave
me errors
"remote access attempt to one or more of the other nodes failed" and i am
not able to change the ip address
Other error which i am gettting on reboots
May 25 19:24:40 orarac01 Cluster.SMF.DR: Unable to open door descriptor
/var/run
/rgmd_receptionist_door
May 25 19:24:40 orarac01 Cluster.SMF.DR:
May 25 19:24:40 orarac01 Error in scha_cluster_get
I hv just installed cluster one node at a time, and reset the install
mode, no configurations done
any suggestions
thanks
Ayaz Anjum
Ayaz Anjum
Systems Engineer , ITT/E6
Information Technology Department
Qatar Petroleum
P.O. Box 47 Doha, Qatar
Tel +974 4405280 Cell +974 5729770
anjum@xxxxxxxxx www.qp.com.qa
--------------------------------------------------------------------------------------------------
Confidentiality Notice : This e-mail and any attachments are
confidential to the addressee and may also be privileged. If you are
not the addressee of this e-mail, you may not copy, forward, disclose or
otherwise use it in any way whatsoever. If you have received this e-mail
by mistake, please e-mail the sender by replying to this message, and
delete the original and any print out thereof.
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Prev by Date: Password works in single user but not at rl3 (UNCLASSIFIED)
- Next by Date: project vs pool vs use
- Previous by thread: Password works in single user but not at rl3 (UNCLASSIFIED)
- Next by thread: project vs pool vs use
- Index(es):
Relevant Pages
|
|
