target number in lpfc.conf

We have are running solaris 8 on a 450 with an Emulex 9002l hba card. We
have configured the sd.conf and lpfc.conf. The sun OS is seeing the LUNS
that have been created. Our issue is that it shows up as
c6t500a098185c60ec2d0s2. (where the long number is the WWPN of our
Netapp hba.

How do we configure it so that it shows up as c6t17d0s2?

t17 is the arbitrary number we assigned in sd.conf and lpfc.conf.

I have also attached the lpfc.conf and sd.conf.

If this can't be done should I be using the emulex driver and configure
it with the emlxs.conf file?



Thanks,



Jerry Rioux

Enterprise Systems Engineer



Help Desk 1-888-746-6478

www.incat.com

[demime 1.01b removed an attachment of type image/gif which had a name of image001.gif]
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • Summary: HBA recommendations for various Sun Hardware
    ... Recommendations are Qlogic QLA23xx cards, Emulex, Sun's Qlogic cards broadly ... Another response was that they used Emulex in the past for the Windows ... Now we pretty much use the Sun Qlogic HBA's for everything. ... I have had nothing but Joy from the Sun branded Dual-Port 2GB QLogics (sun ...
    (SunManagers)
  • QLE2462 on Solaris 10
    ... I'm installing QLE2462-E HBA card in a Sunfire T5220 running Solaris 10. ... I've been looking for appropriate driver and it always point me to Solaris ...
    (SunManagers)
  • Re: JNI or Emulex for 1G Fibre Channel HBA?
    ... Be carefull of SUN branded qlogic ... cards because sun uses their own microcode which is sometimes a pain when ... I chose the JNI because it appeared to be the most commonly used link ... I've been told that Emulex is equal to Qlogic ...
    (comp.sys.sun.admin)
  • Re: JNI or Emulex for 1G Fibre Channel HBA?
    ... Be carefull of SUN branded qlogic ... cards because sun uses their own microcode which is sometimes a pain when ... I chose the JNI because it appeared to be the most commonly used link ... I've been told that Emulex is equal to Qlogic ...
    (comp.sys.sun.hardware)