Solaris 10 - Source routing

First, this network is badly broken, that much I already know...however.

Seeing if there is a host based solution for my Sol 10 host "Server A".

Two hosts

Server A
ce0 is on 192.168.0.2
ce1 is on 172.16.0.2

Client B
eth0 is on 192.168.0.5

Connect from Client B to 172.16.0.2 on Server A, the routing permits
this, the traffic arrives inbound but the replies are via Server A's
default router via the ce0 interface.

Is there any way to pin the routing based on its source rather than
the default based on destination? Meaning if the packet originates on
the ce1 interface, so too should the replies go back out that
interface.
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • gdm hangs
    ... gdm will hang 9 of 10 times when logging out. ... with or without the client having been connected to the Server. ... # Timed login, useful for kiosks. ... Must output the chosen host on stdout, ...
    (Debian-User)
  • PIX firewall (501 and 506) outside subnet not available to inside hosts
    ... They are behind PIX firewalls. ... The firewalls are configured for interface PAT. ... "static" entry for the server. ... Neither server is able to connect to any host on the same ...
    (comp.dcom.sys.cisco)
  • problem with sendmail in solaris 9
    ... names that should be exposed as from this host, ... # save Unix-style "From_" lines at top of header? ... # work recipient factor ... # SMTP STARTTLS server options ...
    (SunManagers)
  • Solaris 10 Source Routing #12 Volume 4, Issue 14 Response
    ... Seeing if there is a host based solution for my Sol 10 host "Server A". ... default router via the ce0 interface. ... Add a route for the 172.n network bound to that interface using the -ifp ...
    (SunManagers)
  • Re: Add new cluster and use existing LUNs?
    ... Storport driver and Powerpath on all of our SAN host servers so we are trying ... In the end I think that I may play it cautious and create a new RAID group, ... > varied activity (DBMSes, Messaging Server, File Server, Web Servers, ... Some of the physical spindle limitations can be addressed through the SAN ...
    (microsoft.public.sqlserver.clustering)