Urgent ! Connection Timeout - RST Packets send back by Sun Server

BismillahirRehmanirRahim

Hi Admin,

We have a Server in our Private LAN, we assigned Pvt IP to it.

Its required to connect to this Server from other Public IP Servers,

so we did the NATING for this.

The problem is that when we did connectivity Test we are unable to

connect to this Server from other Public IPs.

Server is behind the Firewall and required ports are opend at the

Firewall.

On Investigating we found out that TCP Packets are reaching to the

Server but the Server is out accepting the connection and returing

RST [Reset] Packets which causing Connection Timeouts.

Does anyone know, what and where might be the problem.

For testing, to allow connection from anywhere in /etc/hosts.allow i

puted :
ALL ALL

Its very urgent , appreciate your prompt Replies.

Your Junior Admin
Salman
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • Re: Outgoing POP3 email missing/lost/not received
    ... Funny thing is that I have had this ISP for 8 years and it has always been ... It looks like when you last ran CEICW, you set the ISP's mail server to: ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Cannot connect client to server 2003
    ... you need to reconfigure the IP schema of your SBS ... On the SBS 2003 Server open the Server Management console. ... On the Connection Type page, click Broadband, and then click Next. ... Alternate DNS server, type the IP addresses that are provided by your ISP ...
    (microsoft.public.windows.server.sbs)
  • Re: Outgoing POP3 email missing/lost/not received
    ... ISP's mail server instead of the domain name on the ... SUMMARY OF SETTINGS FOR CONFIGURE E-MAIL AND INTERNET ... Internet Connection Wizard. ... After the wizard completes, the following network connection ...
    (microsoft.public.windows.server.sbs)
  • Re: Networking Question - VLANs on SBS 2003 Premium SP1
    ... port on the old router so I now have a segregated WLAN. ... be sure you do not enable any DHCP server in internal network. ... On the Connection Type page, click Broadband, and then click Next. ... On the Network Connection, You must enable and configure the network ...
    (microsoft.public.windows.server.sbs)
  • Re: Urgent! New router and big disaster
    ... In the DHCP Console... ... Right click the DHCP server icon, ... Server Local Area Connection: ... Les Connor [SBS Community Member - SBS MVP] ...
    (microsoft.public.windows.server.sbs)