Jumpstart: syntax error and trying to load from /cdrom media, which disk to use for Solaris 8 image
- From: "Al Saenz: Foundation Technologies" <asaenz@xxxxxxxxxxxxxx>
- Date: Wed, 22 Aug 2007 11:46:51 -0400
Dear Managers,
I'm very close to getting my JS up and running.
My image was created from the Solaris 8 Software HW 5/03 1of 2 disk.
#pwd
/cdrom/sol_8_hw503_sparc/s0/Solaris_8/Tools
#./setup_install_server /mountpoint/d2
(no errors generated)
I'm not sure if I need to use that disk (above) or the Solaris 8 Installation
HW 5/03 disk
Could this be my problem? It seems the client is looking to the cdrom for the
OS image (below).
Any pointers are welcomed, thanks.
###My Error###
Sun Fire V100 (UltraSPARC-IIe 548MHz), No Keyboard
OpenBoot 4.0, 2048 MB memory installed, Serial #66948589.
Ethernet address 0:3:ba:fd:8d:ed, Host ID: 83fd8ded.
Executing last command: boot net - install
Boot device: /pci@1f,0/ethernet@c File and args: - install
Timeout waiting for ARP/RARP packet
SunOS Release 5.8 Version Generic_108528-20 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
NOTICE: dmfe0: PHY 1 link down
NOTICE: dmfe1: PHY 1 link down
NOTICE: dmfe0: PHY 1 link up 10 Mbps Half-Duplex
whoami: no domain name
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
Skipping interface dmfe1
Configured interface dmfe0
Searching for configuration file(s)...
Using sysid configuration file 10.1.4.1:/export/jumpstart/sysidcfg
The system is coming up. Please wait.
Starting remote procedure call (RPC) services: sysidns done.
cat: cannot open /cdrom/.cdtoc
cat: cannot open /cdrom/.cdtoc
expr: syntax error
expr: syntax error
cat: cannot open /cdrom/.cdtoc
expr: syntax error
Starting Solaris installation program...
Searching for JumpStart directory...
Using rules.ok from 10.1.4.1:/export/jumpstart.
Checking rules.ok file...
Using profile: diag.prof
Using finish script: diag_drv.fin
Executing JumpStart preinstall phase...
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.
ERROR: Could not load the media (/cdrom)
#
Details:
Solaris 10 Jumpstart Server (all in one: Boot, Config, Install Servers)
Client:
Sparc V100
Network:
qfe3: 10.1.4.1 mask 255.255.255.0
I'm using bootp (no DHCP)
Isolated network
JS(qfe)-----hub----client
#svcs|grep tftp
online 18:15:20 svc:/network/tftp/udp6:default
#more /etc/ethers
0:3:ba:fd:8d:ed e-05
#more /etc/bootparams
e-05 root=e250-3:/mountpoint/d2/Solaris_2.8/Solaris_8/Tools/Boot
install=e250-3
:/data3/Solaris_2.8 boottype=:in sysid_config=e250-3:/export/jumpstart
install_c
onfig=e250-3:/export/jumpstart rootopts=:rsize=32768
#more /etc/hosts
10.1.4.1 e250-3 #E Rack
#share
- /mountpoint/d2/storage/patches.d rw,anon=0 ""
- /mountpoint/d2/storage/packages.d rw,anon=0 ""
- /export/jumpstart ro,anon=0 ""
- /export/natkit rw,anon=0 ""
- /mountpoint/d2/Solaris_2.8 ro,anon=0 ""
Thank you very much
Al
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers
- Prev by Date: Command Help
- Next by Date: mdb kernel message buffer
- Previous by thread: Command Help
- Next by thread: mdb kernel message buffer
- Index(es):
Relevant Pages
|
|
