cfgadm command doesn't show scsi devices

I forgot to add some info in my email.

I ran devfsadm and also did a boot -r and that didn't help.

When I run the cfgadm -lav command I see it says unconfigured
for my tape drives and robot. What does this mean?


unavailable usb-device n /devices/pci@8,700000/usb@5,3:1
usb0/2 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:2
usb0/3 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:3
usb0/4 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:4



# ./cfgadm -lav
Ap_Id Receptacle Occupant Condition
Information
When Type Busy Phys_Id
c0 connected configured unknown
unavailable scsi-bus n /devices/pci@8,700000/scsi@6:scsi
c0::/dev/lus connected configured unknown
unavailable unknown n
/devices/pci@8,700000/scsi@6:scsi::/dev/lus
c2 connected configured unknown
unavailable scsi-bus n /devices/pci@8,700000/scsi@6,1:scsi
c2::lus1 connected configured unknown
unavailable unknown n /devices/pci@8,700000/scsi@6,1:scsi::lus1
c5 connected configured unknown
unavailable scsi-bus n /devices/pci@8,700000/pci@1/scsi@4:scsi
c5::dsk/c5t0d0 connected configured unknown
HITACHI DK32EJ36NSUN36G
unavailable disk n
/devices/pci@8,700000/pci@1/scsi@4:scsi::dsk/c5t0d0
c5::dsk/c5t1d0 connected configured unknown
FUJITSU MAN3367M SUN36G
unavailable disk n
/devices/pci@8,700000/pci@1/scsi@4:scsi::dsk/c5t1d0
c5::dsk/c5t8d0 connected configured unknown
HITACHI DK32EJ36NSUN36G
unavailable disk n
/devices/pci@8,700000/pci@1/scsi@4:scsi::dsk/c5t8d0
c5::dsk/c5t9d0 connected configured unknown
HITACHI DK32EJ36NSUN36G
unavailable disk n
/devices/pci@8,700000/pci@1/scsi@4:scsi::dsk/c5t9d0
c5::es/ses1 connected configured unknown SUN D2
unavailable processor n
/devices/pci@8,700000/pci@1/scsi@4:scsi::es/ses1
c5::lus4 connected configured unknown SUN D2
unavailable unknown n
/devices/pci@8,700000/pci@1/scsi@4:scsi::lus4
c6 connected configured unknown
unavailable scsi-bus n /devices/pci@8,700000/pci@1/scsi@5:scsi
c6::lus5 connected configured unknown
unavailable unknown n
/devices/pci@8,700000/pci@1/scsi@5:scsi::lus5
usb0/1 connected configured ok Mfg:
<undef> Product: USB adapter for KVM device NConfigs: 1 Config: 0 :
HID Keyboard / Mouse
unavailable usb-device n /devices/pci@8,700000/usb@5,3:1
usb0/2 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:2
usb0/3 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:3
usb0/4 empty unconfigured ok
unavailable unknown n /devices/pci@8,700000/usb@5,3:4




I installed a SUN Ultra 320 dual channel pci card into my 280R running
Solaris 9.
I have a Spectralogic 2k scsi jukebox attached to it with dual AIT-5
drives
inside.
When I do a probe-scsi-all at the ok prompt it sees the jukebox and the
2 AIT-5 drives.

When Solaris boots the OS does not see the jukebox or AIT drives with
the inquire
command.
Has anyone run into this?
I'm seeing this error in my messages file when I run the inquire command.


scsi: [ID 107833 kern.warning] WARNING: /pci@8,700000/pci@1/scsi@5 (qus1):
Sep 19 13:44:54 host1 121: Invalid target.

Thank You.
Dave Martini
LLNL
_______________________________________________
sunmanagers mailing list
sunmanagers@xxxxxxxxxxxxxxx
http://www.sunmanagers.org/mailman/listinfo/sunmanagers

Relevant Pages

  • Re: BootIt NG high level steps - best approach??
    ... backup boot strategy. ... As far as BING, I should tell you I've been using this software ... make managing your bootable options and partition management so much easier. ... drives) and the DATA partition on a mirrored array. ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: 160 Gb drive in a removable caddy give "disk error press ctrl alt del" on boot
    ... But the 120Gb does boot. ... so, you're working with only a single mobile rack, right? ... GB HDD it boots & functions just fine, ... The full capacity has always been seen of all drives it is just a boot ...
    (microsoft.public.windowsxp.hardware)
  • Re: how to change out system disk?
    ... Inaccessible_Boot_Device, when trying to boot from the new HD, but sometimes ... WinXP booted, you can still run Word, Quicken or whatever without having to ... following the primary partition and the first logical drive ). ... > logical drives in a single extended partition. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Dual booting
    ... of Microsoft's dual boot scenario. ... The extended partition is not assigned a drive letter, ... BIOS reserves letters A and B for floppy drives, ... If WinXP Setup ...
    (microsoft.public.windowsxp.general)
  • Re: 2 drives needed to boot - how to fix
    ... my cloned drive and my system won't boot. ... seems my system wants both hard drives to be able to boot. ... Which is your primary master disk - the old or the new disk? ... Could you, in effect, start over by making a fresh install of the XP OS ...
    (microsoft.public.windowsxp.general)