Alphaserver DS10/617MHZ

From: Vimal Upreti (Vimal_at_ohitelecom.com)
Date: 05/27/03

  • Next message: Yogesh Bhanu: "NAS Question" 
    Date: Tue, 27 May 2003 11:21:40 +0400
To: tru64-unix-managers@ornl.gov

    Hi all,
    We have recently received Alphaserver DS10 (1GB Mem & 36.4 GB*2
    Disks)with Tru64Unix version 5.1B pre-installed.
    Since we required Tru64Unix 5.1A with Patch Kit 3, So I re-installed
    fresh Tru64Unix 5.1A on the same disk. Installation was successfully
    completed but unfortunately system is not booting fully. i.e.-comes to
    single user mode with only root partition mounted.
    Before this following messages are displayed in the console:

    Dsfmgr: error: reading local line 3
    V1.1 P 5.1B (rev 173) Tuesday May 2003
    Dsfmgr:error: can not open & read file /etc/dfsc.dat: bad status file
    data/format
    Dsfmgr:error: can not open & read file /etc/dfsl.dat: bad status file
    data/format
    Warning: ignoring error: continue boot process
    Checking local filesystem
    Mounting root
    Usr_cfg_pt:reconfigured
    Mounting root
    Usr_cfg_pt:reconfigured

    Bcheckrc: device naming failed
    Boot configure are verified
    Please correct the problem and continue or reboot

    **********************************************************
    I hope this problem is not related to the minimum required version of
    Tru64Unix 5.1B for this Alphaserver DS10.

    Please advise.

    Thanks & regards.
    Vimal Upreti

  • Next message: Yogesh Bhanu: "NAS Question"