5.1A won't boot on PWS600au

From: Tom Linden (tom_at_kednos.com)
Date: 05/26/04

  • Next message: Tom Linden: "SUMMARY(partial): 5.1A won't boot on PWS600au"
    Date: Wed, 26 May 2004 09:04:28 -0700
    To: Tru64 <tru64-unix-managers@ornl.gov>
    
    

    Two problem, actually, it wouldn't boot, and since I had it down
    decided to update the firmware

    First prtoblem: Using Firmware update v6.5

    The default bootfile for this platform is

            [ARCHIVE]NOFILE.EXE

    Hit <RETURN> at the prompt to use the default bootfile.

    Bootfile:
    %APB-I-FILENOTLOC, Unable to locate NOFILE.EXE
    %APB-I-LOADFAIL, Failed to load secondary bootstrap, status = 00000910

    halted CPU 0

    halt code = 5
    HALT instruction executed
    PC = 20003d10
    warning -- HWRPB is invalid.
    >>>

    Second Problem:

    It goes through the usual booting sequence ending with

    exec: /sbin/mount_advfs -F 0x4000 usr_domain#usr /usr

    trap: invalid memory read access from kernel mode

        faulting virtual address: 0x00000000000004b0
        pc of faulting instruction: 0xfffffc00002cdc70
        ra contents at time of fault: 0xfffffc000038d4c0
        sp contents at time of fault: 0xfffffe0409c8efe0

    panic (cpu 0): kernel memory fault
    syncing disks... done

    DUMP: blocks available: 786432
    DUMP: blocks wanted: 15154 (partial compressed dump) [OKAY]
    DUMP: Device Disk Blocks Available
    DUMP: ------ ---------------------
    DUMP: 0x1300013 593919 - 786429 (of 786430) [primary swap]
    DUMP.prom: Open: dev 0x5100001, block 786432: SCSI 0 1004 0 0 0 0 0
    DUMP: Writing header... [1024 bytes at dev 0x1300013, block 786430]
    DUMP: Writing data. [1MB]
    DUMP: Writing header... [1024 bytes at dev 0x1300013, block 786430]
    DUMP: crash dump complete.

    halted CPU 0

    halt code = 5
    HALT instruction executed
    PC = fffffc000052abb0

    the LEDs are at this time

    1 1 1 0
    0 1 0 0

    where 1 is on

    Drive gone bad?

    Tom

    ---
    Outgoing mail is certified Virus Free.
    Checked by AVG anti-virus system (http://www.grisoft.com).
    Version: 6.0.680 / Virus Database: 442 - Release Date: 5/9/2004
    

  • Next message: Tom Linden: "SUMMARY(partial): 5.1A won't boot on PWS600au"

    Relevant Pages