MSL6000 tape library

From: mahmod kokaje (mkokaje2000_at_yahoo.com)
Date: 06/17/04

  • Next message: Said El Mamouni: "convert passwd" 
    Date: Thu, 17 Jun 2004 00:34:27 -0700 (PDT)
To: tru64-unix-managers@ornl.gov

    Dear managesrs,

    I fased problem on MSL6000 tape library Withe two DLT
    tape drive,

    after connect the A.C power to it it continue boot
    after finish the self test it displays the following
    message on its display,

    "one or more drive are not installed"

    note the devices on:

    (SCSI BUSS0) is:

    "there are no devices attatched to this bus at this
    time"

    (SCSI BUSS1) is:

    protocol bus device type state target Id
    LunID

    SCSI 1 CHGR up 0 0

    SCSI 1 TAPE up 1 0

    I check SCSI cables its ok,

    I replaced between tow drives the broblem as it,

    one or more drive not installed,

    I return the configuration to factory and reconfig it
    the problem is same,
     please advise
    mahmod

     

                    
    __________________________________
    Do you Yahoo!?
    Take Yahoo! Mail with you! Get it on your mobile phone.
    http://mobile.yahoo.com/maildemo

  • Next message: Said El Mamouni: "convert passwd"

    Relevant Pages

    • MSA6000 tape library
      ... I fased problem on MSL6000 tape library Withe two DLT ... (SCSI BUSS0) ... I replaced between tow drives the broblem as it, ...
      (Tru64-UNIX-Managers)
    • Re: Strange PEER error with Danis 506 1.81 generic question
      ... First, a really large number of the systems around me are still SCSI systems which use not only SCSI hard drives, but also SCSI DAT drive tape backup systems, additional SCSI hard drives which can be plugged in, but are not normally there, in mobile drive trays; as well as, in some cases actual SCSI CD-RW units. ... The only use there for the IDE interface is another CD or DVD device for read purposes. ...
      (comp.os.os2.bugs)
    • Asus A7N8X-E w/SATA and SCSI, 4.10 sys install snafu
      ... Old buslogic SCSI controller with 2 drives, a cd, and a tape. ... and nt going off the sata drives. ... I configured the mobo to boot from cd first, ...
      (freebsd-questions)
    • Re: Those were the days
      ... I only have one SCSI ... Windows, once a while there would be an error dialog menu that says ... Windows saved user registry while an application or service was still using ... drives but they're mostly specialized server drives. ...
      (rec.games.computer.ultima.dragons)
    • Re: Strange PEER error with Danis 506 1.81 generic question
      ... First, a really large number of the systems around me are still SCSI systems which use not only SCSI hard drives, but also SCSI DAT drive tape backup systems, additional SCSI hard drives which can be plugged in, but are not normally there, in mobile drive trays; as well as, in some cases actual SCSI CD-RW units. ... The only use there for the IDE interface is another CD or DVD device for read purposes. ... But that flies in the face about data I/O speeds, as well as the requirement, as I understand things, that the CD device has to be a MASTER to be used for boot purposes if you are using, for example, the IBM install CD-ROM disks, or a modified version of this technique for custom boot CD-ROM operations. ...
      (comp.os.os2.bugs)