DS20E Failure at Power up

From: Thomas Edward Kempster (tekempster_at_fastmail.fm)
Date: 08/15/05

  • Next message: David J. DeWolfe: "hwmgr -view devices output after dsfmgr -m" 
    Date: Mon, 15 Aug 2005 07:42:30 -0700
To: tru64-unix-managers@ornl.gov

    This morning I powered down a DS20E to move the PCI cards around, the
    KZPEA was in hose 1 after tests and I wanted it put back into a hose 0
    slot. On power up I noticed that although the green Power LED came on,
    after a while the yellow LEDs briefly flashed, I was then left with just
    the green LED on. I can get no output on the console and suspect the
    system did not power up completely. Normally the yellow LEDs stay on for
    some time whilst testing. After that the green Power LED stays lit if
    all is well.

    I have a horrible feeling that this is a hardware fault but any
    suggestions would be very welcome. I have removed all PCI cards one by
    one without clearing the problem.

    Regards,

    Tom Kempster 

    -- 
http://www.fastmail.fm - And now for something completely different…
  • Next message: David J. DeWolfe: "hwmgr -view devices output after dsfmgr -m"
    • Quantcast