Summary: Problem with DS-KZPCC-AC and ES40/Tru64 5.1B-PK3

From: Hummel Thomas (edv_hummel_at_dw.dambach.de)
Date: 09/27/05

  • Next message: arnoldh_at_celerent.com: "Summary: Tru64 51b Cluster shared tmp" 
    Date: Tue, 27 Sep 2005 13:11:04 +0200
To: "tru64-unix-managers@ornl.gov" <tru64-unix-managers@ornl.gov>

    I have to add the following lines to /sys/conf/<HOSTNAME>

    bus i2o0 at *
    controller i2o_bs0 at i2o0 slot 0
    device disk ri0 at i2o_bs0 drive 0
    controller i2o_bs1 at i2o0 slot 0
    device disk ri1 at i2o_bs1 drive 1

    config_driver pza

    and rebuild a new kernel with
    # doconfig -c <HOSTNAME>

    Copy it to / and reboot.

    Many thanks for all replies.

    >Betreff: Problem with DS-KZPCC-AC and ES40/Tru64 5.1B-PK3
    >
    >Hi Managers,
    >
    >we have an ES40 (2 x 833Mhz) with 4 GB Ram, Tru64 5.1B-PK3, Alpha Firmware 6.6-19. I installed a DS-KZPCC-AC (Firmware CQ17) and connected it to the internal drive cage DS-610-6D. The 3 x HP 72 GB 10k Hotplug SCSI Drives are configured as a RAIS 5. But neither in /devices/disk nor in the disk-app in CDE are entries of the RAID-Volume.
    >
    >On console the volume and the controller are shown as follows:
    >
    >dza517.0.0.2004.1 DZA517 (BSA)
    >pza0.0.0.2004.1 I2OA0
    >
    >
    >Any ideas why the volume doesn't appear? Normally dsfmgr have to create the /dev entries at boot time, right? TIA.
    >
    >
    >Best regards,
    >Thomas Hummel
    >

  • Next message: arnoldh_at_celerent.com: "Summary: Tru64 51b Cluster shared tmp"