DS15 com port RMC stopped responding

Shaun.Racine_at_intier.com
Date: 11/22/05

  • Next message: Steven Frost: "SUMMARY: Fresh install question ( reversion to 5.1)" 
    Date: Tue, 22 Nov 2005 17:09:19 +0000
To: tru64-unix-managers@ornl.gov

    Hi Managers,

    We have recently taken delivery of our first DS15. It is at a remote site.
    I got local IT to connect a crossover serial cable to the com1 port and a
    Windows server I can connect to using remote desktop; using PowerTerm on
    the windows server.

    All worked OK for a day, I could access the SRM console and RMC. But the
    next day, half way through reading a man page, access over the com port
    stopped.

    I cannot even do the esc esc rmc sequence.

    The DS15 has been powered down (power cable unplugged) and up again. I
    talked local IT through setting console to graphics, running rmc and typing
    clear port, to see if it corrected situation.

    The com cable has been unplugged and re-inserted at both ends.

    Does anyone have any ideas why it no longer responds over the serial cable?
    I appreciate any and all ideas.

    TIA

    Shaun

  • Next message: Steven Frost: "SUMMARY: Fresh install question ( reversion to 5.1)"

    Relevant Pages

    • Re: FICON Cascade and Brocade 5000
      ... What we have done is isolated the connection to the remote site so that ... every port on the switch is disabled except those associated with a single ... channel connection/single isl to the remote site. ... For IBM-MAIN subscribe / signoff / archive access instructions, ...
      (bit.listserv.ibm-main)
    • Need help to track trojan.
      ... >un-expected (Trojan?) outbound traffic from my PC to a remote site on ... Since it's using port 80 I'm a bit suspicious that it may be spyware, ... Pay particular attention to any filename after rundll32; ...
      (comp.security.misc)
    • Re: CompanyWeb access
      ... sorry, not following - the remote site has a dynamic IP, the server is static. ... Microsoft MVPs ... Port 443 was being forwarded, ... I have a remote site that has been using a VPN connection to ...
      (microsoft.public.windows.server.sbs)
    • Re: Remote access from Internet
      ... One method is to use a proprietary and encrypted protocol ... Your embedded device is visible to the world, ... the remote site dialled in, and was not externally ... Further assuming that the port used would be a high port and that the ...
      (comp.arch.embedded)
    • Quantcast