Adding one more MC controller in TruCluster Nodes

Hi All,

I'm planning to add one more Memory Channel Controller in all the
Alphaserver nodes of our existing TruCluster 5.1B Setup. This will
provide more redundancy in terms of any failure of MC controller or it's
Cable.

Please do let me know the procedure to add one more MC controller in the
existing production TruCluster Servers.

Do I need to recreate the Cluster again or I have to just add Hardware
only?

Thanks in Advance.

Regards
Vimal Upreti

Relevant Pages

  • Re: Adding site to Domain, question about configuring before deploy
    ... I have a remote access controller setup that allows me to attach ... to the console w/o the machine be attached to the network. ... >> showing different IP subnets and there will not be a router between them ...
    (microsoft.public.win2000.active_directory)
  • SUMMARY: Disk contention problems
    ... If a controller had actually failed, this can trigger the array to ... sccli> show redundancy-mode ... Primary controller location: Lower ... Redundancy mode: Active-Active ...
    (SunManagers)
  • Re: RAID newbie...can I have several partitions on a RAID 1 array?
    ... A cold spare is exactly that. ... But it is redundancy. ... If the OB as a "RAID newbe" has a controller ... For the OP it means that with a hardware failure, ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: Win 2K install reboots, starts over during setup - now says ntldr missing
    ... You didn't mention the current drive controller (possibly SCSI, ... Windows 2000 setup disks or CD-Rom and *F6* very early and very important ... | install (can't remember what it is, ...
    (microsoft.public.win2000.setup)
  • Promise RAID problems
    ... I am trying to setup Gentoo Linux 1.4 on a PC with the Asus PC-DL Deluxe ... defined as a single RAID using the onboard Promise PDC20378 controller). ... Asus A7V8 mainboard - which uses the PDC20376 controller. ...
    (comp.os.linux.setup)