Freeware DVDrecord & Sony DRU-500AX fails to write DVD-R
From: Eberhard Heuser-Hofmann (vaxinf_at_chclu.chemie.uni-konstanz.de)
Date: 12/04/03
- Previous message: Stuart: "Re: How do you modify RMS file attributes when using ofstream I/O ?"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 4 Dec 2003 13:05:16 +0100
Hi,
I've downloaded the DVDrecord Version, compiled it and test it.
Here is a log.
$ mc CDRECORD.EXE -dao -dummy dev=8,0,0 DKA100:[000000]LDNEU.DSK
dvdrtools v0.1.4
Portions (c) 2002-2003 Ark Linux <bero=40arklinux.org>
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2, or (at your option) any later
version.
This program is distributed in the hope that it will be useful, but
WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along
with this program; see the file COPYING. If not, write to the Free
Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
Based on:
Cdrecord 1.11a15 (Alpha-HP-OpenVMS) Copyright (C) 1995-2001 Jörg
Schilling
This is the OpenVMS Freeware V6.0 port of the DVDRTOOLS suite.
Tnis is **not** an official nor a supported port of the DVDRTOOLS
suite. This port involves various modifications to the source
code as received from J=F6rg Schilling, Dr. Eberhard Heuser-Hofmann,
and various other folks.
Please do **not** contact Jörg Schilling concerning any errors that
might be found within this port, and please do **not** expect the
authors of this port within HP OpenVMS Engineering to provide any
support for this OpenVMS Freeware port. (If you want or need support,
commercial recording packages are available. Please use one.) Thanks
CDRECORD: Fifo not supported.
scsidev: '8,0,0'
scsibus: 8 target: 0 lun: 0
Using libscg version 'hp OpenVMS Engineering-0.6h1'
CDRECORD: Warning: using unofficial version of libscg
hp OpenVMS Engineering-0.6h1
(#)scsitransp.c 1.82 02/03/08 Copyright 1988,1995,2000 J.
Schilling.
CDRECORD: Warning: using unofficial libscg transport code version
hp OpenVMS Engineering-scsi-vms.c-1.29h2
=40(#)scsi-vms.c 1.29h2 01/03/18 Copyright 1997 J. Schilling.
Device type : Removable CD-ROM
Version : 0
Response Format : 2
Capabilities :=20
Vendor_info : 'SONY '
Identification : 'DVD RW DRU-500A '
Revision : '2.0g'
Device seems to be : Generic MMC2 DVD-RW.
resid: 244
resid: 244
Using generic SCSI-3/mmc DVD-R/RW driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE=20
Supported modes: PACKET SAO
Starting to write CD/DVD at speed 2 in dummy mode for single session.
Last chance to quit, starting dummy write now.
Operation started at Thu Dec 4 09:31:27 2003.
trackno=0
CDRECORD: error 0. write_g1: scsi sendcmd: retryable error
CDB: 2A 00 00 00 22 A6 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 2C 00 00 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x00 (command sequence error) Fru 0x0
Sense flags: Blk 0 (not valid)=20
resid: 63488
cmd finished after 0.007s timeout 200s
write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 12 00 00 00 00 00 00 00 00 00 00
$
And now? Where is a programmer, who is responsible for this code?
The GPL claims that the must be a responsible person, otherwise
the distribution is illegal.
I'm going to offer a version of DVDwrite at not cost, but only in binary
form and with reduced functionality (only single recording speed, only
DVD minus R(W) recording). Advantage of this solution: Support
if there are problems. DVDwrite is a program that has been tested with
many
DVD burners (Pioneer, Sony, Toshiba, LG). The command set for the DVD
minus R(W) is defined more precisely than for DVD plus R(W) so the numbers
of working configurations are higher.
I would like to get a feedback if this solution is acceptable for the VMS
community or what could be done in this case.
Eberhard
- Previous message: Stuart: "Re: How do you modify RMS file attributes when using ofstream I/O ?"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
