Re: pathworks and domain trust

From: PEN (paul.nuneznosp_at_mhp.com)
Date: 12/06/04 

Date: Mon, 6 Dec 2004 16:18:34 -0500

Hi Mikeal,

"Mikeal" <Mikeal.Clark@gmail.com> wrote in message
news:1102363771.054652.95980@z14g2000cwz.googlegroups.com...
> Peter 'EPLAN' LANGSTOEGER wrote:
>> In article
> <A2A28DB6D52E084783ACD6E6C6F5D7900274F950@EMAILSERVER2.nemschoff.com>,
> Michael Clark <MClark@Nemschoff.com> writes:
>> >Does pathworks have a way to configure at #Pre #Dom with a local
> host file
>> >like lmhost does in windows?
>>
>> Yes. Exactly this. See PWRK$LANMAN:LMHOSTS.
>>
>> --
>> Peter "EPLAN" LANGSTOEGER
>> Network and OpenVMS system specialist
>> E-mail peter@langstoeger.at
>> A-1030 VIENNA AUSTRIA I'm not a pessimist, I'm a
> realist
>
> Thank you for the help that is what I was looking for.
>

Also be aware that you must enable LMHOSTS lookup on the PATHWORKS server
before it will use the LMHOSTS file:

$ admin/config
Select the Transports button
Tab to the LMHOSTS option and press the space bar.

You will need to restart PATHWORKS for this change to take affect. Once
enabled, you can make changes on-the-fly to the lmhosts file, but you need
Advanced Server v7.3A or later to reload the TCP/IP NetBIOS name cache.

If you're running Advanced Server for OpenVMS v7.3A or later you can view
the NetBIOS name cache and dynamically reload the cache:

$ @sys$startup:pwrk$define_commands
$ nbshow knbcache
$ nbshow knbcache reload

HTH,

Paul

Relevant Pages

  • RE: Failed to create a trust relationship between NT4 and 2003 AD
    ... Even though I can use Map Network Drive to connect from NT4 to W2K3 or from ... Please refer to following article carefully to check the lmhosts file: ... Then use command NBTSTAT -R to load it into cache. ...
    (microsoft.public.windows.server.migration)
  • RE: Failed to create a trust relationship between NT4 and 2003 AD
    ... When responding to posts, please "Reply to Group" via your newsreader so ... The contents of the LMHOSTS file will appear as such: ... Then use command NBTSTAT -R to load it into cache. ... For Windows 2000 and 2003 these settings may be ...
    (microsoft.public.windows.server.migration)
  • Re: lmhosts will not load
    ... The lmhosts file includes the #PRE, the last entry has a carriage return, ... the lmhosts option is turned on, the server has been restarted, and the Cisco ... > The hosts file autoloads into cache as soon as you save the file. ... > As for the lmhosts file, you need to make sure the entry you made has the ...
    (microsoft.public.windows.server.dns)
  • Re: How to make XP re-read its HOSTS file?
    ... will flush and reload the NetBIOS name cache from the LMHOSTS file. ... The OP asked how to refresh the DNS name cache from the HOSTS file. ...
    (microsoft.public.windowsxp.network_web)