Re: Problem with reboot
From: Alex Daniels (AlexNoSpamDaniels_at_themail.co.uk)
Date: 06/18/05
- Next message: O'Brien Paddy: "Re: Batch utility to crop images"
- Previous message: Bill Todd: "Re: Intel neuters Montvale, Itanic screams in alarm"
- In reply to: Doc.: "Re: Problem with reboot"
- Next in thread: Doc.: "Re: Problem with reboot"
- Reply: Doc.: "Re: Problem with reboot"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Sat, 18 Jun 2005 10:44:38 +0100
"Doc." <doc@openvms-rocks.com> wrote in message
news:Xns967972E44C348dcovmsrox@212.100.160.126...
> %NEWS-I-NEWMSG, Doc. wrote in
> news:Xns96796EAAF4BDDdcovmsrox@212.100.160.126
>
>> %MSCPLOAD-I-CONFIGSCAN, enabled automatic disk serving
>
> The system eventually allowed me back in. :)
>
> Here's the error I got with shadowing enabled...
>
> %SYSINIT-E- volume already mounted on a differently named device, status =
> 007280B4
>
You still have the DAHMER's System disk mounted on the other two nodes, as
DAHMER$DKA0, it will need to be dismounted from those boxes first. As by
setting an ALLOCLASS, you are changing it. to $x$DKA0, where x is DAHMER's
ALLOCLASS.
GEIN $ sh dev d
Device Device Error Volume Free Trans
Mnt
Name Status Count Label Blocks Count
Cnt
DAHMER$DKA0: HostUnavailable 0 ALPHASYS 4254750 1
3
mounted
MANSON $ sh dev d
Device Device Error Volume Free Trans
Mnt
Name Status Count Label Blocks Count
Cnt
DAHMER$DKA0: HostUnavailable 0 ALPHASYS 4254750 1
3
mounted
Did you set SHADOW_SYS_DISK and SHADOW_SYS_UNIT? You will want set at least
the former, if you are going to shadow the system disk.
Alex
- Next message: O'Brien Paddy: "Re: Batch utility to crop images"
- Previous message: Bill Todd: "Re: Intel neuters Montvale, Itanic screams in alarm"
- In reply to: Doc.: "Re: Problem with reboot"
- Next in thread: Doc.: "Re: Problem with reboot"
- Reply: Doc.: "Re: Problem with reboot"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|