Re: Miata questions.

Re turning off with out warning. Check your internal fan, If it stops the
system will power down.
Re machine check. You will need to look at the errorlog for more details on
the crash or possible non-fatal machine checks.

anal/err/inc=(mem,cpu,bug)/out=errorlog.txt
or
dia/inc=(mem,cpu,bug)/out=errorlog.txt

If the crashes are frequent you could try setting your console to the com1
serial port >>>SET CONSOLE SERIAL
and attached a PC using terminal emulation to capture the console log to a
file. If the system crashes it may printout the machine check frame with the
error registers. If the system halts without saving a crashdump try this
command to extract the machine check frame from memory before rebooting or
initializing the system. Post the output in a reply

>>>examine -q -p 6060 -n 200

Brian



<prep@xxxxxxxxxxxxxxxx> wrote in message
news:877jaj6ssn.fsf@xxxxxxxxxxxxxxxxxxx
>I have just got a 500au and a 600au. The 600 is a GL and the
> 500 not as I understand it.
>
> What is the fix for the power switch on the not GLs? It turns off
> with no warning or provacation.
>
> Anyone know what a MAchine Check in PAL mode with a PC of c400 is?
>
> tnx.
>
> --
> Paul Repacholi 1 Crescent Rd.,
> +61 (08) 9257-1001 Kalamunda.
> West Australia 6076
> comp.os.vms,- The Older, Grumpier Slashdot
> Raw, Cooked or Well-done, it's all half baked.
> EPIC, The Architecture of the future, always has been, always will be.


.

Relevant Pages

  • Re: DEC 3000/800 AXP boot problem
    ... I have aquired a DEC 3000 Model 800 AXP and have a boot problem. ... system was booting about once every ten power ups. ... you want the CONSOLE environment variable to be ... The SROM code is loaded into the CPU's instruction ...
    (comp.os.vms)
  • Re: Reboot every 1 hour, 19 seconds
    ... since the power outage, it reboots every 1.00.19, approx. ... [If you don't have the patience to do that, there is the option of setting up a serial console to another machine and logging the console there.] ... Crane Division, Naval Surface Warfare Center ...
    (Fedora)
  • Apparent hang in or around pcireg_cfgread
    ... I hit break on the serial console a couple of times, with about half a minute in between, but since it seemed like it wasn't going to recover by itself, I panicked it. ... <ACPI PCI bus> on pcib0 ... 2 ports with 2 removable, ... WARNING: ...
    (freebsd-stable)
  • Apparent hang in or around pcireg_cfgread
    ... I hit break on the serial console a couple of times, with about half a minute in between, but since it seemed like it wasn't going to recover by itself, I panicked it. ... <ACPI PCI bus> on pcib0 ... 2 ports with 2 removable, ... WARNING: ...
    (freebsd-stable)
  • Re: new FC3 installation unable to burn CDs
    ... Indicated writing power: 5 ... ATIP start of lead in: -11745 ... cdrecord: Operation not permitted. ... WARNING: ...
    (Fedora)