Splitting serial cables ?

Is it possible to split a serial cable coming from an OPA0: to go to 2
separate serial ports ? (not a switch, I want hardwired connections).

Goal: have a node's OPA0: go to serial ports on 2 different machines so
that no matter which node is up, I can always SET HOST/DTE from the
running node to access the OPA0:



And while I am at it, how about a 3 way ? Have OPA0: go to 2 serials
ports as well as a true blue VT220 (actually, they are now yellowish :-)
.

Relevant Pages

  • Re: OPA0 on DS10L problem
    ... confirmed that the settings for OPA0 are identical for the two. ... SET HOST/DTE OPA0 and SET HOST/DTE TTA0 ... Kill that process and you can log on, unless the terminal noise ...
    (comp.os.vms)
  • Re: scrambled terminal output on OPA0:
    ... Someone mentioned that you had OPA0 physically connected to the serial port of ... would be logged in to TTA2: of node2, do a SET HOST/DTE TTA1: which would ... connect you to the cable going to OPA0: ... and get to the DTAPAD> prompt and issue SHOW DTE command to see the current ...
    (comp.os.vms)
  • Re: OPA0 on DS10L problem
    ... confirmed that the settings for OPA0 are identical for the two. ... SET HOST/DTE OPA0 and SET HOST/DTE TTA0 ... You use TTA0 as the console port on the DS10L. ...
    (comp.os.vms)
  • Re: OPA0 on DS10L problem
    ... confirmed that the settings for OPA0 are identical for the two. ... SET HOST/DTE OPA0 and SET HOST/DTE TTA0 ... Can you get the serial console on the DS10L? ... Which COM port is it on? ...
    (comp.os.vms)
  • Re: OPA0 on DS10L problem
    ... confirmed that the settings for OPA0 are identical for the two. ... SET HOST/DTE OPA0 and SET HOST/DTE TTA0 ...
    (comp.os.vms)