TCPIP Configuration -TCPIP-E-BIND_NO_ZONEXFR, zone transfer was unsuccessful

Hi Group,

My saga with TCPIP continues. I now can connect to the internet which
is a massive improvement and I am already ready to smile.

I am setting up my IP information using DHCP from a ADSL router.

I think the only issue I have left is a rather strange error when I
show hosts.
$ tcpip show host

LOCAL database

Host address Host name

127.0.0.1 LOCALHOST, localhost
192.168.1.12 ds10.DHCPPool
%TCPIP-W-NORECORD, information not found
-TCPIP-E-BIND_NO_ZONEXFR, zone transfer was unsuccessful


$ tcpip show host /local

LOCAL database

Host address Host name

127.0.0.1 LOCALHOST, localhost
192.168.1.12 ds10.DHCPPool

Now my domain is openvms not DHCPpool.
I can see from the logicals that TCPIP defines that my router is
sending the openvms domain name.

Where is the "TCPIP$INET_DOMAIN" = "DHCPPool" coming from.

I have deleted all the TCPIP*.dat files in sys$system, reboot and
reconfigured TCPIP.

Is this mismatch causing my error message.

Anyone know what is causing this error?


Thanks




(LNM$SYSTEM_TABLE)

"TCPIP$BGDRIVER" = "SYS$LOADABLE_IMAGES:TCPIP$BGDRIVER.EXE"
"TCPIP$BIND_DOMAIN" = "openvms"
"TCPIP$BIND_DOMLST" = "........"
"TCPIP$BIND_DOMLST000" = "openvms"
"TCPIP$BIND_RETRY" = "...."
"TCPIP$BIND_SERVER" = "........"
"TCPIP$BIND_SERVER000" = "221.232.0.4"
"TCPIP$BIND_SERVER001" = "221.232.0.3"
"TCPIP$BIND_STATE" = "........"
"TCPIP$BIND_TIMEOUT" = "...."
"TCPIP$CONFIGURATION" =
"SYS$COMMON:[SYSEXE]TCPIP$CONFIGURATION.DAT;1"
"TCPIP$DEVICE" = "_BG0:"
"TCPIP$DHCP_sig_mbx" = "MBA27:"
"TCPIP$ETC" = "SYS$SPECIFIC:[TCPIP$ETC]"
"TCPIP$EXAMPLES" = "SYS$COMMON:[SYSHLP.EXAMPLES.TCPIP]"
"TCPIP$HOST" = "SYS$COMMON:[SYSEXE]TCPIP$HOST.DAT;1"
"TCPIP$INET_DOMAIN" = "DHCPPool"
"TCPIP$INET_HOST" = "ds10"
"TCPIP$INET_HOSTADDR" = "192.168.1.12"
"TCPIP$INTERNET_SERVICES" =
"SYS$LOADABLE_IMAGES:TCPIP$INTERNET_SERVICES.EXE"
"TCPIP$LIBPCAP_EXAMPLES" =
"SYS$COMMON:[SYSHLP.EXAMPLES.TCPIP.LIBPCAP]"
"TCPIP$LIBRARY" = "SYS$SYSROOT:[TCPIP$LIB]"
"TCPIP$NETWORK" = "SYS$COMMON:[SYSEXE]TCPIP$NETWORK.DAT;1"
"TCPIP$PROXY" = "SYS$COMMON:[SYSEXE]TCPIP$PROXY.DAT;1"
"TCPIP$PROXY_SERVICES" =
"SYS$LOADABLE_IMAGES:TCPIP$PROXY_SERVICES.EXE"
"TCPIP$ROUTE" = "SYS$COMMON:[SYSEXE]TCPIP$ROUTE.DAT;1"
"TCPIP$RPC" = "SYS$SYSROOT:[TCPIP$LIB.RPC]"
"TCPIP$SERVICE" = "SYS$COMMON:[SYSEXE]TCPIP$SERVICE.DAT;1"
"TCPIP$SNMP" = "SYS$SYSROOT:[TCPIP$LIB.SNMP]"
"TCPIP$SNMP_EXAMPLES" = "SYS$COMMON:[SYSHLP.EXAMPLES.TCPIP.SNMP]"
"TCPIP$SYSTEM" = "SYS$COMMON:[SYSEXE]"
"TCPIP$TNDRIVER" = "SYS$LOADABLE_IMAGES:TCPIP$TNDRIVER.EXE"



Routing information
$ tcpip show route

DYNAMIC

Type Destination Gateway

AN 0.0.0.0 192.168.1.1
AH 127.0.0.1 127.0.0.1
AN 192.168.1.0/24 192.168.1.12
AH 192.168.1.12 192.168.1.12

$ tcpip show route /perm
%TCPIP-E-ROUTEERROR, error accessing routes database (TCPIP$ROUTE)
-TCPIP-W-NORECORD, information not found

.

Relevant Pages