Re: Restricting Access to TCP/IP and DECnet
- From: "Robert Jarratt" <nospam@xxxxxxx>
- Date: Wed, 30 Jan 2008 20:28:57 GMT
"Robert Jarratt" <nospam@xxxxxxx> wrote in message
news:S4Pnj.34169$a61.25452@xxxxxxxxxxxxxxxxxxxxxxx
Is it possible to restrict access to TCP/IP (5.1) and DECnet (IV) on a
per-user basis? In other words I would like someone to be able to access
my machine, but not to go from that machine to anywhere else on the
network.
Thanks
Rob
Thanks for all the replies. A few people have pointed out that my question
is not entirely clear. The reason I want to do this is that I want to give
an acquaintance access to my hobbyist VAX. I have opened up telnet access to
it from the internet, but the machine is on my home network and just to be
safe I would rather he be unable to go anywhere else on the home network,
including back out on to the internet. I suppose I could put the machine in
a DMZ if I was doing this properly, but my firewall server only has 2 nics
at the moment.
I will remove NETMBX and see if that does the trick.
Thanks
Rob
.
- Follow-Ups:
- Re: Restricting Access to TCP/IP and DECnet
- From: Bob Koehler
- Re: Restricting Access to TCP/IP and DECnet
- From: IanMiller
- Re: Restricting Access to TCP/IP and DECnet
- From: Robert Jarratt
- Re: Restricting Access to TCP/IP and DECnet
- References:
- Restricting Access to TCP/IP and DECnet
- From: Robert Jarratt
- Restricting Access to TCP/IP and DECnet
- Prev by Date: Re: VT100 standards and EDT
- Next by Date: Re: M$IE; was: DSPP Integrity remanufactured h/w...
- Previous by thread: Re: Restricting Access to TCP/IP and DECnet
- Next by thread: Re: Restricting Access to TCP/IP and DECnet
- Index(es):
Relevant Pages
|