Re: Will GS140 boot to an RA8000 from SRM Console??



Yes, the most visible difference between various versions of wwidmgr
is the number of paths that you can configure.

It is a while ago, but configuring both the EMC and the Hitachi's was
no problem.

Bart

On Dec 11, 9:04 pm, s...@xxxxxxxxxx wrote:
WWIDMGR changed somewhat based on the version of SRM, so yes, but the
GS140 has less console memory, so the limits on the number of paths is
lower...

Sean

On Dec 11, 11:32 am, Len Whitwer <l...@xxxxxxxx> wrote:

On Dec 11, 9:04 am, s...@xxxxxxxxxx wrote:

Used to work on a lot of GS140 using various incarnation of RA8000:
something like 43 pairs of HSG80 at one time...

The hard part is to make sure that the version of SRM is supported by
the version of controller firmware and adapter firmware.  The last
couple of rev's of HSG80 firmware where not good (8.4???, 8.7???).  It
sounds like you are adding FC adapters for the first time, and if so,
also check firmware of all the pieces of the system, including the
version of the PCI card cage hardware ("B0" I think, though that
requirement may have been for CIPCAs).

Be sure you understand the use of WWIDMGR, and if you use HBVS on the
boot volumes and DOSD, the impact and limits of multiple paths in SRM..

Sean

On Dec 10, 4:18 pm, Len Whitwer <l...@xxxxxxxx> wrote:

Am considering upgraging my RA7000 (DAS) to an RA8000 (Fibre)
but can't tell for sure if the SRM on a GS140 will support booting the
system disk on an RA8000. Has anyone ever done this??

-Len Whitwer
Puget Sound Data Systems, Inc.
19501 144th Ave. NE Suite D-100
Woodinville, WA  98072
e-mail    mailto:l...@xxxxxxxx
Internet:http://www.psds.com
Toll Free: (866)857-0710
Tel: (425) 488-0710
Fax: (425) 488-6414- Hide quoted text -

- Show quoted text -

Thanks for info Sean.

Is WID manager on GS140 the same as an ES40?

Len

.



Relevant Pages

  • Re: Will GS140 boot to an RA8000 from SRM Console??
    ... something like 43 pairs of HSG80 at one time... ... the version of controller firmware and adapter firmware. ... the impact and limits of multiple paths in SRM. ...
    (comp.os.vms)
  • Re: Will GS140 boot to an RA8000 from SRM Console??
    ... the version of controller firmware and adapter firmware. ... the impact and limits of multiple paths in SRM. ... but can't tell for sure if the SRM on a GS140 will support booting the ...
    (comp.os.vms)
  • Re: Will GS140 boot to an RA8000 from SRM Console??
    ... so the limits on the number of paths is ... the version of controller firmware and adapter firmware. ... the impact and limits of multiple paths in SRM. ...
    (comp.os.vms)
  • Re: AXPpci33 TOY Battery, DS12887+
    ... stuck with a dead link on every trial. ... the Firmware was the most recent. ... fit really mandatory stuff as the mandatory stuff got bigger. ... SRM with another not-quite-identical SRM? ...
    (comp.sys.dec)
  • Re: Install VMS on a Alphastation 200 ?
    ... are running the SRM console, and I would verify that the console ... some bear-trap with firmware that needs to be upgraded and then won't .. ... Unofficial Affordable OpenVMS Home Page: ... Unofficial OpenVMS Hobbyist Support Page: ...
    (comp.os.vms)