Re: Hobbyist RX2620

On Mar 6, 1:56 pm, d...@xxxxxxxxxx wrote:
Hi Alaln,

When entering the EFI shell I see (Manually typed)

Loading.: EFI Shell [Built-in]
EFI Shell version 1.10 [14.62]
EltCheckDevice : error reading catalog Device Error
Device mapping table
  blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
  blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
  blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)
Shell>

The light on the DVD Rom flashes and if the VMS DVD is not in the
drive I do not EltCheckDevice : error reading catalog Device Error.

Starting to indicate my DVD Rom is dead.

Should I see other devices in the device mapping table?

Dug

Dug,

What does it show if you type the Shell> map command?

This is what I see:-

Shell> map
Device mapping table
fs0 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD
(Part1,Sig3936D311-9D02-11D9-816B-AA000400FFFF)
fs1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD
(Part4,Sig3936D310-9D02-11D9-816C-AA000400FFFF)
fs2 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD
(Part1,SigAEEA9121-1276-11DA-85AC-AA0004000704)
fs3 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD
(Part4,SigAEEA9120-1276-11DA-85AD-AA0004000704)
blk0 : Acpi(HWP0002,0)/Pci(2|0)/Ata(Primary,Master)
blk1 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)
blk2 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD
(Part1,Sig3936D311-9D02-11D9-816B-AA000400FFFF)
blk3 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD
(Part2,Sig3936D310-9D02-11D9-816A-AA000400FFFF)
blk4 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD
(Part3,Sig3936D311-9D02-11D9-816A-AA000400FFFF)
blk5 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD
(Part4,Sig3936D310-9D02-11D9-816C-AA000400FFFF)
blk6 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun0,Lun0)/HD
(Part5,Sig3936D310-9D02-11D9-816B-AA000400FFFF)
blk7 : Acpi(HWP0002,100)/Pci(1|0)/Scsi(Pun1,Lun0)
blk8 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)
blk9 : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD
(Part1,SigAEEA9121-1276-11DA-85AC-AA0004000704)
blkA : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD
(Part4,SigAEEA9120-1276-11DA-85AD-AA0004000704)
blkB : Acpi(HWP0002,100)/Pci(1|1)/Scsi(Pun2,Lun0)/HD
(Part5,SigAEEA9120-1276-11DA-85AC-AA0004000704)
Shell>

This is an rx2620 system with:-

System Firmware: 3.10 [4445]
BMC Version: 3.47
No MP
2 x 1.6 GHz Active CPU's
1 x DVD drive
3 x 73GB SCSI disks

I'm connected to the system on the "CONSOLE SERIAL A" connector
(nothing special).
The system is headless (no display). I can see fs0 thru fs3 (file
system 0 thru file system 3)
which are not shown on your system.

The system is running OpenVMS V8.3-1H1 and all the disks are
formatted, and I must say that this is a seriously fast system for
such a small box.
If you can get your system going you won't be disappointed.

I'm not sure there is anything else I can do to help?

Alan Fay
.