HSD10 - MV3800 - TLZ07 Tape drive Question
From: Dan Snyder (ddsnyder_at_isrv.com)
Date: 06/11/04
- Previous message: Rob B: "Re: Bcache module specs?"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 10 Jun 2004 19:05:55 -0700
I recently put a storageworks BA350 + HSD10 setup on my MicroVAX 3800
in order to move away from the somewhat scarce DSSI type drives.
No problems in the system recognizing the SCSI drives as I was
able to image both DSSI drives to the SCSI ones. I setup the HSD10
as node 2 and the host DSSI Qbus controller to see it. On the HSD10 side
all disk drives as well as the tape drive are seen and have been
configured. When I do a sh dev at the SRM prompt, the tape drive
should be recognized as MUC110:. Any thoughts on what I should be
looking for. The TLZ07 is in a SBB. I am no expert in these systems,
but do consider myself experienced around DEC equipment.
Hardware config is:
MV3800 KA655 CPU
48MB RAM
2 DSSI nodes plus new HSD10 node
DELQNA ENet
CXI8
VCB02 card set
TK70 tape drive
OS: VMS 5.5-2
- Previous message: Rob B: "Re: Bcache module specs?"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
