Re: Graphisc failure

From: Chuck Slivkoff (slivkoff-AT-hp-DOT-com_at_localhost.invalid)
Date: 12/15/03

  • Next message: Chuck Slivkoff: "Re: HPUX setlocale()" 
    Date: Mon, 15 Dec 2003 22:51:46 GMT

    On Wed, 10 Dec 2003 13:51:09 +0000, george wrote:

    > I'm afraid it doesnt. Plugged in the proper USB keyboard and mouse. Even
    > unplugged the serial cable. On powering it on it still comes up using the
    > serial port a console. Still no graphics output. George

    If you get the yellow "soft key" labels, then the kernel is able to
    initialize the STI on the graphics adapter.

    Interrupt the boot & use the "path" command to check the console path.
    With USB kbd connected, it should be "graphics_0", IIRC. Also, boot with
    USB kbd connected and watch the LCD display. It will display where the
    console is being directed just prior to booting the kernel.

    Try starting the X server: /usr/bin/X11/X. What errors/output do you
    get?

  • Next message: Chuck Slivkoff: "Re: HPUX setlocale()"

    Relevant Pages

    • Re: help with RX2600/VMS 8.2FT setup please?
      ... >1) I'm not sure that the graphics output (ATI Radeon type on the MP board, ... >driven from the system board after system board power-up) is actually ... >supported as a console device. ... and a UBS/serial connector to connect to the RX2600. ...
      (comp.os.vms)
    • Re: help with RX2600/VMS 8.2FT setup please?
      ... I'm not sure that the graphics output (ATI Radeon type on the MP board, ... Use the MP console to clear the system and event logs - the flashing ... colin DOT butcher AT xdelta DOT co DOT uk ...
      (comp.os.vms)
    • Re: DS20 never gives firmware prompt
      ... tries to boot, the LCD display looks normal, goes through the normal ... startup cyle, no beeps, gets the the usual "AlphaServer DS20" display, ... I've pulled all of the cards (aside from the graphics, ... The console is probably set to serial. ...
      (comp.sys.dec)
    • Re: Developing Wince 5.0 Console Application using eVC++
      ... I have to control the device driver output based on input given by ... Is there any sample console application available. ... the input from user(i have LCD display in my device and i input by ...
      (microsoft.public.windowsce.app.development)