Re: HP9000/827S
From: Alex van Denzel (vandenzel_at_hotmail.com)
Date: 06/28/04
- Previous message: Mart Rentmeester: "Re: Compiling PHP as module on Itanium"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Mon, 28 Jun 2004 21:40:21 +0200
Prent Patrick wrote:
> 1 - On the 10base2 802.3 LAN card, I get a flashing amber light. According
> to the description on the card, this means I have a xcrv/net error. What
> does this mean? I checked the card to make sure it was jumpered for INT
> (10base2) and not EXT (AUI). I have the coax from the 10base2 port
> connected to a 10base2/10baseT media converter. The output from the 10baseT
> side of the converter is plugged into an old 10mpbs hub. The hub is then
> connected to the LAN. I have link/activity lights everywhere except on the
> 10base2 side of the media converter.
Did you attach the coax cable directly at the BNC connectors or did you
use T-connectors and terminators?
see also: http://www.tldp.org/HOWTO/Net-HOWTO/x2508.html
-- Good luck Alex. (I don't read hotmail, for obvious reasons)
- Previous message: Mart Rentmeester: "Re: Compiling PHP as module on Itanium"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
