Re: 700/96 terminal and K260 server
From: Alan D Johnson (adjtech_at_usadatanet.net)
Date: 10/19/04
- Next message: HP_BRS: "Re: HP 9000 B2000 not seeing Hard Disks"
- Previous message: BWCA: "Re: FS: HP i2000 Dual Itanium Workstation/Server"
- In reply to: Hans Martin Schwengeler: "Re: 700/96 terminal and K260 server"
- Next in thread: urle - Uli Betzler: "Re: 700/96 terminal and K260 server"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: Mon, 18 Oct 2004 19:24:10 -0400
Hans Martin Schwengeler wrote:
> Carlos Y??ez S. wrote:
>
>> Hi to everyone,
>>
>> This message is not a temporal lapsus or the last part of "Back to the
>> Future" :-) :
>>
>> I'm trying to resucitate an HP K260 server, which has been stored for
>> a couple of years. This beatiful machine is not alone: with it I have
>> a 700/96 terminal.
>>
>> When I started the machine, it perfoms all the initial routine and
>> ends with a "RUN FXXF" message on the display. So, it seems it's all
>> O.K. but I cannot see a thing at the console.
>>
>> I've tried all the possible combinations I figured and read (in this
>> group and websites) but i'haven't achieve the goal: i put the remote
>> mode on and off and also tried with the Console and External Modem
>> connectors.
>>
>> The cable I've used is null-modem kind (electrical and pin layout
>> tests perfomed).
>>
>> I guess i should be able to access via telnet but unfortunately i
>> don't the machine's IP (it's static).
>>
>> There's someone who has an idea and brings me hope? :-)
>>
>> Greetings,
>> Carlos Yáñez S.
>> carlos.yanez.s@gmail.com
>
> Hallo
>
> You might find the IP with "arp -a" if on the same ethernet segment.
>
> Yours, Hans Martin.
The best try would be the following; shutdown the system and the term.
Use a standard 9-25 null modem cable. Turn on the 700/96, you should
hear 1 initial beep and then .. a second press the user/system key (left
of F5)
press F8 config F5 term config, F5 power on default. then F1 save.
power up the system and it is supposed to auto negoitiate,
baud/stop/etc... you should see some garbadge and then you will get POST
codes along the bottom. If all else fails I have HP cable that if you
are in the US I could send you for cost of shipping.
- Next message: HP_BRS: "Re: HP 9000 B2000 not seeing Hard Disks"
- Previous message: BWCA: "Re: FS: HP i2000 Dual Itanium Workstation/Server"
- In reply to: Hans Martin Schwengeler: "Re: 700/96 terminal and K260 server"
- Next in thread: urle - Uli Betzler: "Re: 700/96 terminal and K260 server"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
|
