Re: Ignite

From: Florian Anwander (spam.interessiert.nicht_at_mnet-online.de)
Date: 05/20/05

  • Next message: Robert Klute: "Re: Ignite" 
    Date: Fri, 20 May 2005 16:36:15 +0200

    Hi Robert

    >>-x inc_entire=vg00 -x exclude=/home
    > In addition to /home, I exclude /opt, /var/adm/sw, and /var/adm/crash
    > when I do a make_tape_recovery.

    /opt: if you leave it away, you have to disable all stuff, which invokes
    things from /opt while the startup.

    /var/adm/sw should never never never be removed from a backup, because
    you won't be able to install any patch without the swinstall database.
    Does init 1 start fine, without it? (I remember, that there is a step
    "configuring unconfigured software" in the rc2... hmmm:
    /sbin/rc2.d/swconfig). Also after a complete crash or some hardware
    change you may find, that it is necessary to install a patch immediately
    after booting up.

    /var/adm/crash is ok to leave away.

    Florian

  • Next message: Robert Klute: "Re: Ignite"

    Relevant Pages

    • Re: Using XPe in real embedded systems
      ... Yes normal startup you can expect above 20s + BIOS startup time. ... If you have one or two non-boot critical drivers that do not support hibernation. ... Make sure that you do not install drivers before you run following program. ... Remove all driver hardware nodes, and do all other pre installation operations. ...
      (microsoft.public.windowsxp.embedded)
    • Re: SP 2 compatibility problem
      ... It makes it almost through the startup, ... > another thing that is interesting....when I do a repair install from my XP ... problems started from the time you installed the new hardware. ... slipstream an upgrade version. ...
      (microsoft.public.windowsxp.general)
    • Re: Media Player 11
      ... installing WMP wouldn't be necessary to check for failing startup ... possibility that there are updated driver software for the PC? ... install WMP11 again to create Boot Log, ... Digital Media MVP: 2004-2008 ...
      (microsoft.public.windowsmedia.player)
    • Re: XP install probs
      ... So I started it with a boot disk. ... > Install went fine up to a point, ... > black screen with the windows XP logo and the moving blue bar and wouldn't ... > mode I set it to run in diagnostic startup mode, ...
      (microsoft.public.windowsxp.general)
    • Re: EZ-Antiviurs v7 and WinXP startup problems
      ... I have done a clean install of XP, downloaded the latest driver package from ... And it still hung up two days ago during startup. ... Michael ... > it a little time to shake out before I have all these folks switch over. ...
      (microsoft.public.windowsxp.basics)