Re: Newbie question - please
- From: "bitt7462@xxxxxxxxxxxxx" <bitt7462@xxxxxxxxxxxxx>
- Date: Mon, 26 Jun 2006 16:51:54 -0400
Rick Jones
Many thanks for your assistance! The on-board CD Drive seems to be defective. I had an old Plexor so I connected and now am able to read/load. I'll get into the original and see if something obvious is wrong.
Thanks again,
Dave
Rick Jones wrote:
bitt7462@xxxxxxxxxxxxx <bitt7462@xxxxxxxxxxxxx> wrote:.
The cd indicates HP 9000 series 700 b/c/j class. I have loaded it before as an upgrade a while back. Since I'm learning, I have corrupted some things and wish to do a clean install.
In the Sun world, one would command 'boot cdrom' from the firmware OK prompt. Is there a similar command in HP/UX ISP?
Somewhere along the boot sequence, you should see a "hit any key in 10
seconds" or somesuch to interrupt the boot process. From there you
can (IIRC the 735's had this) do a "search" (sea) command and if there
is a bootable CD in the drive the drive will be listed as one of the
boot options. You can then boot from that option with:
boot <optionnumber>
to boot from the CD.
rick jones
- References:
- Newbie question - please
- From: bitt7462@xxxxxxxxxxxxx
- Re: Newbie question - please
- From: Rick Jones
- Re: Newbie question - please
- From: bitt7462@xxxxxxxxxxxxx
- Re: Newbie question - please
- From: Rick Jones
- Newbie question - please
- Prev by Date: Re: HP-UX11i Password Authentication
- Next by Date: Re: any hp dealers in UK which has 712/100 for sale
- Previous by thread: Re: Newbie question - please
- Next by thread: Data Protector EMail reporting
- Index(es):
Relevant Pages
|
|