Re: Using tape autochanger?

Steve Allen <allen@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
[deleted]

But those are not usable with either mtx nor mc.

[Earlier:]

0/3/1/0/4/1 mpt HP AB290-60001 PCI/PCI U320 SCSI 2-port 1000B-T ComboAdapter
(at /dev/mpt5)
0/3/1/0/4/1/0.0 schgr HP MSL6000 Series (Autochanger)
(at /dev/rac/c5t0d0)
0/3/1/0/4/1.1.0 stape HP Ultrium 3-SCSI (Tape Drive)
(at /dev/rmt/c5t1d0BEST)
0/3/1/0/4/1.7.0 sctl Initiator
(at /dev/rscsi/c5t7s0)

Have you tried mc(1) with the /dev/rscsi/c5t7s0 device file?

mc(1) is the only (HP) supported utility for a changer, and mc(1)
requires the SCSI pass through driver (sctl) device file.

--
Frank "Hoping that he still got this right after (nearly) 4 years." Slootweg
.