Re: downloading irix

From: Bjorn Ljungdahl (bjorn.ljungdahl_at_telia.nospam.com)
Date: 02/25/04 

Date: 25 Feb 2004 12:49:12 -0600

davidw76@hotmail.com (pip) wrote:

>Thanks, I managed to get hold an original CD set and have installed
>Irix 6.5.5.
>Now I'm trying to get the Indy hooked up to my PC so I can share the
>internet connection.
>I have a crossover cable and have set up networking, but I keep
>getting the ec0 no carrier: check ethernet cable message.
>I know the cable is good so maybe the Indy has a hardware fault. I
>assume this message would not be caused by anything related to the
>configuration of networking in the OS?

If the ethernet TP port is broken you can use a AUI-TP
converter and use the AUI port instead. That one is also
called ec0.
This worked on my Indy when lightning (or something) had
damaged the TP port.
Or go all the way and buy a Phobos 100MBit instead.
Unless you have XZ graphics, because then it won't fit.

Relevant Pages

  • Re: Synchronizing Time...
    ... I originally used Indy for this but Indy uses port 37 whereas Synapse can ... All our internal Cisco routers use port 123 so I used Synapse ... DateTimeToSystemTime(dDateTime, dSysTime); ...
    (borland.public.delphi.thirdpartytools.general)
  • Re: Clientsocket
    ... Your MASTER program will need to have a TServerSocket instance. ... port number, the TServerSocket will throw an exception. ... Indy and see how they work. ...
    (comp.lang.pascal.delphi.misc)
  • Re: Trailing space causes exception in StrToInt
    ... ftp client working with my ISP's ftp server, in passive mode. ... // Determine port ... and reinstalled Indy, but I still get the problem. ...
    (comp.lang.pascal.delphi.misc)
  • Re: Synchronizing Time...
    ... > I originally used Indy for this but Indy uses port 37 whereas Synapse can ... You were using TIdTime in Indy, and that's a different protocol than SNTP. ... It uses the correct port and protocol. ...
    (borland.public.delphi.thirdpartytools.general)