Re: downloading irix

From: Jonathan (jonny_morrisuk_at_yahoo.co.uk)
Date: 03/10/04

  • Next message: Ivan Rayner: "Re: Wake on lan (WOL) on SGI Octane?" 
    Date: 10 Mar 2004 12:37:33 -0800

    > Turns out the ethernet port is broke on mine too. the company

    One software thing to look out for also is a network configuration
    file (I think it was /etc/config/ifconfig-1.options in my case), as my
    primary network interface (ec0) had been disabled by this file. You
    should alter it to set ec0 to up. (see man pages for ifconfig),
    although I don't think this would give the symptoms you are
    describing. Worth a try!

    When you connect your Indy to a hub (using a normal patch cable), you
    shouldn't get the ec0 error message even if there's nothing else
    connected to it.
    See if you can get a hub with leds so that you can see when things are
    connected and sending data.

  • Next message: Ivan Rayner: "Re: Wake on lan (WOL) on SGI Octane?"

    Relevant Pages

    • Re: A dumb newbies network configuration question
      ... i'm a newbie in network configuration, so i need help for the following ... cards. ... So i want to replace the hub and connect the 3 others with a cross over cable to the U10 ports. ... e) configured the ethernet adapter on the amd with ip 192.168.1.1 the adapter on the intel with 192.168.2.1 the adapter on the mac with 192.168.3.1 ...
      (comp.unix.solaris)
    • Re: need help with router config.
      ... under Network Configuration. ... > DSL router with static IP address. ... that hub has the rest of the computers on the network. ... > How should the nic cards be configured? ...
      (microsoft.public.windows.server.sbs)