connect vt420 to O2 problem
Date: Thu, 09 Sep 2004 14:12:37 +1000
I have been trying to connect a vt420 to the serial port 1 and port 2
of a O2 IRIX 6.5 without success. There is simply no response from
the O2 to the terminal.
I modified the /etc/inittab as well as using the Serial device mangaer
to add the terminal for the 2 ports.
The null modem cable is a 3 wired null modem cable:
There is simply nothing displayed on the terminal.
Any suggestion as to what could have gone wrong?
- Re: interthread communication
... Since this is a writer thread, typically you will PostThreadMessage to it for each packet ... Note that if you have a serial port you must open it for asynchronous I/O. ... of the buffer in via a PostThreadMessage, so using a single variable cannot make sense. ...
- Re: roZetta Status
... roZetta firmware is written in ZBasic and uses the ZX-40 from Elba, ... There is one main highspeed RS232 level serial port which interfaces ... with the TW523 as the ZX-40's interrupts are sluggish about 3% of the time. ...
- Re: Multiple serial consoles via null modem cable
... /etc/ttys is for configuring a machine to tie getty (think login prompt) ... assuming you attach to the serial port there. ... On box1, you'd have something like this in /etc/ttys: ...
- Re: How to Disable Ethernet
... you can use the serial port as an alternative method of getting debug. ... can disable KITL debugging and just read all of the messages that come out. ...
- Hard Disk Not Mounting
... I want to port WinCE ... -USBD:OpenPipe success, hPipe = D039E210 ... HidParse: 'Preparing to Allocate memory ... DEVICQueuedPipe::CheckForDoneTransfers - failure on TD 0xd05858a0, ...