Re: problems with cdrom scsi.,....

From: Stefano (vsd1968_at_alice.it)
Date: 08/06/05

  • Next message: Stefano: "Re: problems with cdrom scsi.,...." 
    Date: Sat, 06 Aug 2005 16:34:10 GMT

    The termnation is ok...i try termination on jumper and on the external box
    too but not work.

    "Walther Mathieu" <mathieu.nospam@in4tec.de> ha scritto nel messaggio
    news:dcvhpj$tv9$04$1@news.t-online.com...
    > termination?
    >
    > Stefano wrote:
    > > Hi...i bought a Sony DRU415 cdrom tested with SGI machines but when i
    > > connect the drive on my Octane 2 with an external case the computer
    reboot
    > > continuosly.
    > > I verify the scsi id and others jumpers but nothing work.
    > > Someone can help me?
    > > Thnks
    > > Stefano
    > >
    > >

  • Next message: Stefano: "Re: problems with cdrom scsi.,...."

    Relevant Pages

    • Re: SCSI HD
      ... needs to be set as a slave with a jumper, ... cable you have supports auto termination, ... |> SCSI cables need to be terminated so the connectors are ... The drive should be seen if the SCSI adapter is ...
      (microsoft.public.windowsxp.hardware)
    • Re: DAT drive headaches
      ... Termination for internal drives is usually done at the ... IMO it is a mistake to set this jumper ... and for an si diode, this is around .7 volts, so TERMPWR ...
      (Fedora)
    • Re: Dead brand new SCSI drive?
      ... I do notice that the harddrives have "Termination Power" jumpers. ... drives have this jumper on. ... The two drives that came from installed from ...
      (linux.redhat)
    • Re: Using a turned off external SCSI device as cable extension?
      ... Watch the overall cable length. ... What is the case if TERM PWR is not configured via a jumper? ... there are only the three ID jumpers and a general "Termination" ...
      (comp.periphs.scsi)
    • SUMMARY: Sun StorEdge PCI Dual Ultra3 SCSI HBA
      ... Thanks to Wes Garland and Dale Hirchert for their informative replies to ... termination" implies that the port on the HBA is terminated. ... two Arena Rackforce II RAID boxes. ... "The jumper settings used for terminator enable and disable are: ...
      (SunManagers)