Re: Sun Solaris USB Flash Drive mount command (scsa2usb driver)

From: jankemi(remove) (_at_mail.com)
Date: 09/27/03 

Date: Sat, 27 Sep 2003 14:35:38 GMT

> In summary, the high-priority QUESTIONS which remain are:
> Q: Where is the SECOND USB device? Is it at something called sd45?
> If it's sd45, how do I find the mount "/dev/?dsk/c?t?d?s?:?" argument?
> What is "sd45" if it's not the second USB flash card I plugged in?
> Q: Should vold.conf be modified or not (methinks it should be left alone)?

I don't have the 'hub@' in my device tree so I might be wrong but......

> Sep 26 17:10:10 flow genunix: [ID 936769 kern.info]
> scsa2usb0 is /pci@8,700000/usb@5,3/hub@3/storage@1
                                            ^
                                            c5

> Sep 26 17:10:27 flow genunix: [ID 936769 kern.info]
> scsa2usb1 is /pci@8,700000/usb@5,3/hub@4/storage@1
                                            ^
                                            c5

The conroller is the same so whatever link(s) in /dev/rdsk/c5* that
points to

../../devices/pci@8,700000/usb@5,3/hub@4/storage@1......

should be the second flash card.

I'm not sure though where the second card would be indicated in c?t?d?.
c? is controller, so either t? or d? should point to the disk. I'm not
sure how hub & storage map to t? and d?.

I usually look at the dates & times in /dev/rdsk & see which ones were
created/changed about the time that I started installing stuff or when I
ran devfsadm.

--Mike

Relevant Pages