Re: A1000: drivutil vs. raidutil
From: John S. (fishinjts_at_netscape.net)
Date: 09/29/03
- Next message: GeorgeC: "Monitor failures"
- Previous message: Juergen Keil: "Re: Sun Solaris USB Flash Drive mount command (scsa2usb driver)"
- Maybe in reply to: Mr. Johan Andersson: "Re: A1000: drivutil vs. raidutil"
- Next in thread: Vikas Agnihotri: "Re: A1000: drivutil vs. raidutil"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Date: 29 Sep 2003 03:47:45 -0700
Vikas Agnihotri <fornewsgroups@vikas.mailshell.com> wrote in message news:<oprv1bspi63k814u@news.fu-berlin.de>...
> I have a system with 10 LUNs on a RAID A1000 module. I have made all the
> necessary changes in sd.conf, rmparams, etc.
>
> drivutil -l c2t5d0 shows me all the 10 luns but
>
> raidutil -c c2t5d0 -i
> shows me only the standard 8 luns.
>
> Why is this?
>
> Thanks
What type of system is this A1000 connected to? What version of
Solaris? If it's PCI did you make the correct changes to the glm.conf
file? I know you said you made all the necessary changes but the
glm.conf can be confussing since it is/was documented wrong in a
couple of places...
For Solaris 2.6 it should be:
device-type-scsi-options-list =
"Symbios StorEDGE A1000", "lsi-scsi-options",
"Symbios StorEDGE A3000", "lsi-scsi-options",
"SYMBIOS RSM Array 2000", "lsi-scsi-options";
lsi-scsi-options = 0x107f8;
For 2.7 and about it should be:
device-type-scsi-options-list =
"Symbios StorEDGE A1000", "lsi-scsi-options",
"Symbios StorEDGE A3000", "lsi-scsi-options",
"SYMBIOS RSM Array 2000", "lsi-scsi-options";
lsi-scsi-options = 0x407f8;
Notice the slight difference on the lsi-scsi-option line...
hth,
john
- Next message: GeorgeC: "Monitor failures"
- Previous message: Juergen Keil: "Re: Sun Solaris USB Flash Drive mount command (scsa2usb driver)"
- Maybe in reply to: Mr. Johan Andersson: "Re: A1000: drivutil vs. raidutil"
- Next in thread: Vikas Agnihotri: "Re: A1000: drivutil vs. raidutil"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Relevant Pages
|
