Looking For Terminal Server That Can Give Each Serial Port a Unique IP

From: CHANGE USERNAME TO westes (DELETE_westes_at_earthbroadcast.com)
Date: 12/30/03


Date: Tue, 30 Dec 2003 11:27:52 -0800

I am looking for a terminal server product that can map each serial port on
the terminal server to a unique IP address. My application for this is
management of several network devices through a GUI tool that expects to
connect directly via telnet or a serial port to the device. The
management software has no programmatic capability, so I have no way to
negotiate my way through a terminal server's selection menu. What I need
instead is the ability to configure the management tool with a unique IP
address that will connect directly to the text stream of the device via
telnet, thereby faking out the software into thinking it has a network
connection to the device when it fact it has a serial connection.

There are situations where I cannot connect directly to the network port on
the device (such as when I'm configuring the network port or upgrading the
firmware on the network management card). Therefore I have no choice but
to go in by serial port.

I would greatly appreciate referrals to terminal server products that have
the capability I am describing.

-- 
Will
westes AT earthbroadcast.com


Relevant Pages

  • Re: Looking For Terminal Server That Can Give Each Serial Port a Unique IP
    ... > the terminal server to a unique IP address. ... > management of several network devices through a GUI tool that expects to ... > connect directly via telnet or a serial port to the device. ...
    (comp.sys.sun.admin)
  • Re: Looking For Terminal Server That Can Give Each Serial Port a Unique IP
    ... >> the terminal server to a unique IP address. ... >> management of several network devices through a GUI tool that expects to ... >> connect directly via telnet or a serial port to the device. ...
    (comp.sys.sun.admin)
  • Re: Looking For Terminal Server That Can Give Each Serial Port a Unique IP
    ... > the terminal server to a unique IP address. ... > management of several network devices through a GUI tool that expects to ... > connect directly via telnet or a serial port to the device. ...
    (comp.sys.sun.admin)
  • Re: W98 serial server -> Linux
    ... You want network traffic to be punted to the serial port? ... Linux RS232 -> linux app. ... On the instrument side the flow is from serial to ...
    (comp.os.linux.networking)
  • Re: Atari St/Lantronix
    ... I was thinking I could upload files to a ftp server from my st but How do I get it to connect with the Lantronx box. ... MSS1 looks more like a terminal server over the serial port than a UDS-10 ... configure its network parameters as described in the Lantronix manual; ... (It will probably have to be a host on your local network, ...
    (comp.sys.atari.st.tech)