Re: Problem installing a jukebox (Solstice Bac

From: Florian Stiassny (flo_at_xvnews.unconfigured.domain)
Date: 01/22/04 

Date: 22 Jan 2004 11:58:04 GMT

In article 1@ID-222334.news.uni-berlin.de, Daniel Wetzler <Daniel.Wetzler@uni-koeln.de> writes:
>Hallo,
>
>I'm trying to install a Jukebox (Storedge L25) on a Solaris 8 system,
>using Solstice Backup 6.1.
>If I try to install the jukebox with the jbconfig command I get the
>folowing error :
>
>
>
> 13) 8mm AIT 29) himt 45) tz89
> 14) 8mm AIT-2 30) logical 46) tz90
> 15) 8mm AIT-3 31) LTO Ultrium 47) tzs20
> 16) 8mm Mammoth-2 32) LTO Ultrium-2 48) VXA
>Choice? 23
>
>Any more device paths for media drive 1? (yes/no) no
>Your jukebox has a bar code reader.
>Do you want bar code reader support enabled? (yes/no) yes
>Do you want volume labels to match bar code labels? (yes/no) yes
>SJI Failure[0x 29]: Not Ready, ASC 0x80 ASCQ 0x01
>Would you like to configure another jukebox? (yes/no) no
>
>
>I don't know what this "SJI Failure[0x 29]: Not Ready, ASC 0x80
>ASCQ 0x01" does mean.
>
>Does anyone know how to fix that ?
>
>If I try to use the tape drive with ufsdump or as singel drive with
>networker/solstice backup it wiorks.
>
>Greetings,
>
>Daniel
>

can you see the jukebox scsi device ? , here its an L20:
cd /etc/LGTOuscsi ; ./inquire
       scsidev@0.0.0:SEAGATE ST318203LSUN18G 034A|Disk, /dev/rdsk/c0t0d0s2
       scsidev@0.1.0:IBM DDYST1835SUN18G S94A|Disk, /dev/rdsk/c0t1d0s2
       scsidev@0.6.0:TOSHIBA XM6201TASUN32XCD1103|CD-ROM, /dev/rdsk/c0t6d0s2
       scsidev@3.0.0:HP C7200 133S|Autochanger (Jukebox)
       scsidev@3.1.0:HP Ultrium 1-SCSI E1 |Tape, /dev/rmt/0cbn

                        \|/
                        o o
 ___________________oOO_(_)_OOo______________________________________
Florian Stiassny Florian.Stiassny@motorola.com

Relevant Pages