Re: 400-480MHz upgrade?

From: Mike Beckmann (mbeckmann_at_ibmsystems.com)
Date: 02/24/04

  • Next message: Bib Endum: "Re: 400-480MHz upgrade?" 
    Date: Tue, 24 Feb 2004 09:35:26 -0600

    That's a good question on the software. I think the patch will fix it but
    as far as the hardware you definitely need the new system board. Call me
    if you need it $900
    Thanks Mike Beckmann (We do IBM RS6000 and Cisco too)
    847-468-8900

    "Andy Lennard" <ck_karisma@SCRUB-THIS.hotmail.com> wrote in message
    news:c1f4r5$e8a$1@titan.btinternet.com...
    > Dear All,
    >
    > I have been asked to upgrade a 400MHz E450, with Solaris2.6, to use 480MHz
    > processors.
    >
    > The system board is a 501-5270, so I think this needs to be changed to the
    > 501-5673 at the same time.
    >
    > The bit I'm concerned about is the OE... According to SunSolve,
    > sunsolve.sun.com/handbook_private/Systems/E450/E450.html, I should use HW
    > 5/98 to build the system. I know it was built from the 3/98 CDs.
    >
    > If I apply the current recommended patch cluster will that sort everything
    > out, or would the latest kernel patch suffice?
    >
    > Or do I really need to go back to the distribution CDs?
    >
    > I'd like to do the least possible, as I'll be on-site when it happens, but
    > I'm concerned that the least posible might not be quite enough!
    >
    > I'd appreciate the experience of anyone who has done this upgrade and can
    > shed some light for me.
    >
    > Many thanks,
    > Andy.
    >
    >

    x-- 100 Proof News - http://www.100ProofNews.com
    x-- 3,500+ Binary NewsGroups, and over 90,000 other groups
    x-- Access to over 1 Terabyte per Day - $8.95/Month
    x-- UNLIMITED DOWNLOAD

  • Next message: Bib Endum: "Re: 400-480MHz upgrade?"

    Relevant Pages

    • Re: em device hangs on ifconfig alias ...
      ... After applying the patch there were no rejects, ... >>lack of ARP packet going out that is causing the problems with moving IPs, ... and my fix was naive. ... not programmed into a hardware with my patch applied. ...
      (freebsd-stable)
    • Re: Re: bce0: Error mapping mbuf into TX chain!
      ... I'll let you merge in the down/up fix that I put into -current. ... Error mapping mbuf into TX chain! ... defragmentation patch mentioned in this thread. ... For architectures that have IOMMU hardware it may have corrupted DMA ...
      (freebsd-stable)
    • Re: [PATCH] Fix open/close race in saa7134
      ... Fix open/close race in saa7134 ... configures the hardware just to then see the hardware ... This patch makes the release function use the same lock as the open ...
      (Linux-Kernel)
    • Re: [PATCH 06/41] rt2800pci: fix comment about IV/EIV fields
      ... Subject: [PATCH] rt2800pci: fix comment about IV/EIV fields ... The bit tested by hardware is TXD_W3_WIV and its value ...
      (Linux-Kernel)
    • Re: 400-480MHz upgrade?
      ... I think the patch will fix it but ... as far as the hardware you definitely need the new system board. ... > If I apply the current recommended patch cluster will that sort everything ...
      (comp.sys.sun.hardware)