Re: Resurrecting a Sun Enterprise 3500 server

Damon Getsman wrote:
A Sun Enterprise 3500 server has been sitting in our server room for
some time where I work, and I'm starting to think that it may well
have the best solution for a problem that we're currently having
employing a few Sun packages. I won't get into that here, I already
posted on comp.sys.sun.misc about that. I'm thinking that installing
them on native Solaris instead of different Linux variants might be a
bit easier, though, especially with a machine custom configured just
to run the apps that I need.

What I need to find out is how this headless beast can be communicated
with. It has 4 ethernet ports and a serial port. I have no idea what
sort of system or configuration was previously on this machine, so I'm
thinking that it might be best to start with using the serial port as
a terminal interface, provided the machine has a working OS installed
on it right now.

I'm not sure of what kinds of settings I'll need to put on the comm
port to attempt this from a ubuntu linux workstation. Also not sure
if I should try doing this with a null modem cable or if straight
serial will give what I need.

I'd try 9600 8/n/1 for the comm settings and a null modem cable. It might be something else but that's a reasonable first guess. If it doesn't work, try 300, 1200, 2400, 4800, 19,200. . . .

Also, any information about what I can do if this machine does not
have a valid OS installed would be much appreciated; I'm at a loss due
to the headlessness of this machine. It does have a CD drive for
media, so it has that much at least. :P


It should have firmware (OBP or Open Boot PROM) that should talk to you through the serial port. Sun has a couple of manuals in PDF format that discuss the OBP, commands, etc.

You can't get Solaris media on CDROM any longer. Either find whatever was installed on your machine if some busybody hasn't thrown it away or
download Solaris 10 from Sun and burn your own CDs. Some CD drives don't like home made CDs; all you can do is to burn your CDs at the slowest available speed which will sometimes work. If you are very lucky, you might find a media kit on e-Bay. Or, you might be able to install a DVD drive if the existing CD drive is EIDE. If it's SCSI
you're probably out of luck; SCSI DVD drives may be available but I suspect that they are both rare and expensive!

You can "break in" by booting from the install CD; ISTR you want to say
"boot -s CDROM" at the OBP prompt. Mount the root partition at "/a".
Then vi /etc/passwd and/or /etc/shadow to clear the root password.

Now you can boot from disk and log in as root with no password.

You can execute /usr/sbin/sys-unconfig to wipe the current network config, reboot and be prompted for a new root password, networking configuration, time zone, etc. Note that once you do this, the old config is gone! You can, if you wish, use passwd to set a new root password without wiping the network configuration.

Where you go from here depends on your intentions, knowledge, and abilities!


.

Relevant Pages

  • Re: Resurrecting a Sun Enterprise 3500 server
    ... It has 4 ethernet ports and a serial port. ... Some CD drives don't like home made CDs; all you can do is to burn your CDs at the slowest available speed which will sometimes work. ... you might be able to install a DVD drive if the existing CD drive is EIDE. ... You can execute /usr/sbin/sys-unconfig to wipe the current network config, reboot and be prompted for a new root password, networking configuration, time zone, etc. ...
    (comp.sys.sun.admin)
  • Re: Installing Fedora without a CDROM: my HOWTO
    ... Here is my HOWTO on installing Linux from a USB drive, ... disk or USB key rather than a CDROM boot disk. ... Put auxillary files (special drivers, post setup install config, ... This way I can mount any number of hard drives in the ...
    (Fedora)
  • Re: Booting Vista from external drive violate MS EULA?
    ... of OS install to diff drives. ... Meaning this boots off usb vista, if there is another hard drive ...
    (microsoft.public.windows.vista.general)
  • Re: XP HOME BOOT FAILURE
    ... I did check both hard drives using the setup CD ROM that came with the new ... downloaded and updated the driver for the original 80 GB Maxtor hard drive. ... > If you run a repair install as I initially described, ... >>> on, follow the screens. ...
    (microsoft.public.windowsxp.accessibility)
  • Re: Quiet general purpose + music laptops?
    ... Without being able to convert a distro into a bootable USB flash /SD Card, ... So I would recommend all distro mainters look at their netbook ... Install gparted on your machine using synaptic. ... As the pocket drives cost only 40 pounds, ...
    (uk.comp.os.linux)
Loading