Re: Disk drive defect on Enterprise 450?

From: Michael Tosch (eedmit_at_NO.eed.SPAM.ericsson.PLS.se)
Date: 10/27/04

  • Next message: Beardy: "Re: Disk drive defect on Enterprise 450?"
    Date: 27 Oct 2004 10:45:58 GMT
    
    

    In article <417f5f1f$0$33632$ed2619ec@ptn-nntp-reader02.plus.net>, Beardy <beardy@beardy.net> writes:
    > Christian Kier wrote:
    > > Juhan Leemet wrote:
    > > > I learned the very useful command (here in one of these Sun newsgroups):
    > >
    > >>
    > >> iostat -nE
    > >>
    > >> tells you about all SCSI (all I have, and others?) devices, including
    > >> disks, CDs, tapes. Lists info about each device, like so:
    > >
    > >
    > > Thank you all for your hints. Every named tool works fine. But the disk
    > > didn't show up anywhere. Not in format, scsiinfo, iostat, prtconf,
    > > prtvtoc,...
    > > Not until I created the soft links in /dev/dsk/c2t2... and
    > > /dev/rdsk/c2t2... to the corresponding /devices/ files.
    > > Now it shows up in every tool properly formatted and everything like all
    > > the other disks. Does this tell me something? Is there a reason for
    > > these soft links not being present?? Do I have to check anything first
    > > or can I start working with this disk as normal?
    > >
    > > /Christian
    >
    > This suggests that the disk was a later addition to the system, and that
    > there has not been a reconfiguration boot since its addition. From
    > OBP, you could have done a boot -r, or to constitute the device files
    > and links, you could have done drvconfig;disks. You could also touch a
    > file called /reconfigure and do a normal boot.
    >

    In addition to "boot -r" or "reboot -- -r" (old way),
    Solaris 2.6 has the following commands:

    drvconfig
    disks

    (RTFM!)

    Since Solaris 8 there is one command for everything:

    devfsadm

    -- 
    Michael Tosch
    IT Specialist
    HP Managed Services
    Technology Solutions Group
    Hewlett-Packard GmbH
    Phone: +49 2407 575 313
    Mail: michael.tosch:hp.com
    

  • Next message: Beardy: "Re: Disk drive defect on Enterprise 450?"

    Relevant Pages

    • Re: Linux, BSD, and Unix are fundamentally insecure.
      ... > that everyone of those commands is needed. ... > disk no problem. ... > Windows doesn't have this flaw. ... Can boot any Winders box from a CD reset the admin password. ...
      (comp.unix.bsd.freebsd.misc)
    • Re: Linux, BSD, and Unix are fundamentally insecure.
      ... > that everyone of those commands is needed. ... > disk no problem. ... > Windows doesn't have this flaw. ... Can boot any Winders box from a CD reset the admin password. ...
      (comp.unix.bsd.openbsd.misc)
    • Re: Can you edit the registry from Recovery Console
      ... Boot from the Nordahl disk ... Type ls (to see the current keys) ... at any stage to see the available commands. ...
      (microsoft.public.win2000.general)
    • SimCoupe disk access question
      ... and I've selected it from the File menu as Floppy 1, but when I type BOOT ... to enable the DOS commands I get the error "53 No DOS", ... I presumed that SimCoupe would put DOS on there when it created the disk, ... (The disk commands aren't documented in the general manual - in the ...
      (comp.sys.sinclair)
    • Re: Installation: doesnt see setup files on hard drive?
      ... > disk the BIOS is set to boot from must have an appropriate Master Boot ... I was worried about those points you made above so I removed all drives except the one I want to instll ...
      (microsoft.public.win2000.general)