Re: Want to Add Hard Drives to E3500 On-the-Fly

From: Jorgen Moquist (jorgen.moquist_at_n.o.s.p.a.m.mailbox.swipnet.se)
Date: 01/21/05 

Date: Fri, 21 Jan 2005 23:50:43 +0100

gloworm@backwoodzmusic.com wrote:
> I have an ST336704FC hard drive that I want to install on-the-fly into
> an E3500. E3500's are suppose to support hot-swappable drives. Since
> this is a new disk, do you see any problems? Do I have to run luxadm or
> any other command before or after installation of the new hard drive?
> Thank you in advance.
>
devfsadm to see the new disk.
/Jörgen

Relevant Pages

  • Re: partition naming - newbie
    ... hardware address that is assigned to each disk, tape, or CD-ROM. ... Using the prtconf command ... In addition to managing these directories, the devfsadm command also ... Berkeley fast file system. ...
    (comp.unix.solaris)
  • Re: New HDD Installation
    ... "John John" wrote: ... a single partition disk. ... confirm or change the active flag of the partition using the FDISK command. ... There are other ways to mark the partition active, either with a Windows ...
    (microsoft.public.windowsxp.general)
  • Re: Forgot to put old_rootvg to sleep before reboot - How to Wake
    ... Performs operations on existing alternate rootvg volume groups. ... To rename Alternate Disk Volume Group: ... The alt_rootvg_op command can be used to determine which disk is the ... flag) can be executed at this time. ...
    (comp.unix.aix)
  • PC8477 Demo Program
    ... The PC8477 Demo Program is designed to allow access to all software commands and registers of National Semiconductor's PC8477 Advanced Floppy Disk Controller. ... The left center indicates the number of bytes transferred during the last command issued. ...
    (comp.sys.ibm.ps2.hardware)
  • Re: Windows XP boot failure
    ... If you have a friend with a real Windows ... read/write to the drives using a command line ... For more information on a specific command, ... CHKDSK Checks a disk and displays a status report. ...
    (microsoft.public.windowsxp.basics)