SunBlade 150 Monitor problems

From: Cux (SPAMAJSIMAMU_at_spamsucks.ass)
Date: 08/30/05 

Date: Tue, 30 Aug 2005 10:44:36 +0000 (UTC)

Hi,

I have a problem with monitor signal on my SunBlade. The workstation was
working fine, and I didn't use it for a while (only accessing remote, not on
the console itself).

So, the monitor has an indication that it is on (orange light) but when I
boot the station there is no signal on the monitor and off course no picture.
Also, when booting I hear the monitor "picking up" - trying to start, and the
colour of the led changes, but only for two-three seconds and then nothing.

Resolution settings are:

m64config -prconf

--- Hardware Configuration for /dev/fbs/m640 ---
ASIC: version 0x27004752
DAC: version 0x0
PROM: version 108
Card possible resolutions: 720x400x85, 640x480x60, 640x480x72, 640x480x75
        800x600x56, 800x600x60, 800x600x72, 800x600x75, 1024x768x60
        1024x768x70, 1024x768x75, 1280x1024x75, 1024x768x85, 800x600x85
        640x480x85, 1280x1024x60, 1152x900x66, 1152x900x76, 1280x1024x67
        1600x1280x76, 1920x1080x72, 1280x800x76, 1440x900x76
        1600x1000x66, 1600x1000x76, 1920x1200x70, 1280x1024x85
        1280x1024x76, 1152x864x75, 1600x1200x75, 1600x1200x60
        1024x768x85, 800x600x75, 640x480x85, 1920x1200x60, 1920x1080x60
        vga, svga, 1152, 1280, 800x600, 1024x768, 1280x1024, 1152x900
        1600x1280, 1920x1080, 1600x1000, 1920x1200, 1600x1200
Monitor possible resolutions: 640x480x75, 800x600x75, 1024x768x75
        1280x1024x75, 800x600x75, 1280, 800x600, 1024x768, 1280x1024
Possible depths: 8, 24
Current resolution setting: 1280x1024x75
Current depth: 8

--- OpenWindows Configuration for /dev/fbs/m640 ---
OWconfig: machine
Video Mode: 1152x900x76
Depth: 24

Monitor is not Sun made, its some Fujitsu Siemens crap but it worked fine
until now.

Any suggestions? Pls help

Thx,

Vatroslav 

-- 
DMS - Demonstrating My Style.

Relevant Pages

  • RE: Monitor wont work until xp is loaded
    ... Mitch the monitor is garbled there all so. ... I have changed the refresh and resolution settings. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: SunBlade 150 Monitor problems
    ... > I have a problem with monitor signal on my SunBlade. ... The workstation was ... the monitor has an indication that it is on but when I ... > Resolution settings are: ...
    (comp.sys.sun.hardware)
  • Re: SunBlade 150 Monitor problems
    ... the monitor has an indication that it is on but when I ... > Resolution settings are: ... You say you were accessing remotely, do you mean via serial ttya type ... maybe all you need to do is use the serial access to change ...
    (comp.sys.sun.hardware)
  • Re: display flickers
    ... Have you tried tweking the resolution settings in Control Panel? ... video card. ... Leonard Grey ... monitor issue as I have tried other monitors and have the same problem. ...
    (microsoft.public.windowsxp.help_and_support)
  • SunBlade 150 Monitor Problems
    ... The workstation was ... working fine, and I didn't use it for a while (only accessing remote, not ... the monitor has an indication that it is on but when I ... Resolution settings are: ...
    (comp.sys.sun.misc)