Re: SunBlade 150 Monitor problems

From: Ed Hall (ehall_at_ultraspec.com)
Date: 08/30/05 

Date: Tue, 30 Aug 2005 09:20:33 -0600

"Cux" <SPAMAJSIMAMU@spamsucks.ass> wrote in message
news:Xns96C281A249ECEvculjat@10.243.130.100...
> Hi,
>
> I have a problem with monitor signal on my SunBlade. The workstation was
> working fine, and I didn't use it for a while (only accessing remote, not
> on
> the console itself).
>
> So, the monitor has an indication that it is on (orange light) but when I
> boot the station there is no signal on the monitor and off course no
> picture.
> Also, when booting I hear the monitor "picking up" - trying to start, and
> the
> colour of the led changes, but only for two-three seconds and then
> nothing.
>
> Resolution settings are:
>
> m64config -prconf
>
> --- Hardware Configuration for /dev/fbs/m640 ---
> ASIC: version 0x27004752
> DAC: version 0x0
> PROM: version 108
> Card possible resolutions: 720x400x85, 640x480x60, 640x480x72, 640x480x75
> 800x600x56, 800x600x60, 800x600x72, 800x600x75, 1024x768x60
> 1024x768x70, 1024x768x75, 1280x1024x75, 1024x768x85, 800x600x85
> 640x480x85, 1280x1024x60, 1152x900x66, 1152x900x76, 1280x1024x67
> 1600x1280x76, 1920x1080x72, 1280x800x76, 1440x900x76
> 1600x1000x66, 1600x1000x76, 1920x1200x70, 1280x1024x85
> 1280x1024x76, 1152x864x75, 1600x1200x75, 1600x1200x60
> 1024x768x85, 800x600x75, 640x480x85, 1920x1200x60, 1920x1080x60
> vga, svga, 1152, 1280, 800x600, 1024x768, 1280x1024, 1152x900
> 1600x1280, 1920x1080, 1600x1000, 1920x1200, 1600x1200
> Monitor possible resolutions: 640x480x75, 800x600x75, 1024x768x75
> 1280x1024x75, 800x600x75, 1280, 800x600, 1024x768, 1280x1024
> Possible depths: 8, 24
> Current resolution setting: 1280x1024x75
> Current depth: 8
>
>
>
> --- OpenWindows Configuration for /dev/fbs/m640 ---
> OWconfig: machine
> Video Mode: 1152x900x76
> Depth: 24
>
> Monitor is not Sun made, its some Fujitsu Siemens crap but it worked fine
> until now.
>
> Any suggestions? Pls help
>
> Thx,
>
> Vatroslav
>
>
> --
> DMS - Demonstrating My Style.
You say you were accessing remotely, do you mean via serial ttya type
access? If so, maybe all you need to do is use the serial access to change
the input back to keyboard and output to screen.
Regards,
Ed

Relevant Pages

  • RE: Monitor wont work until xp is loaded
    ... Mitch the monitor is garbled there all so. ... I have changed the refresh and resolution settings. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: display flickers
    ... Have you tried tweking the resolution settings in Control Panel? ... video card. ... Leonard Grey ... monitor issue as I have tried other monitors and have the same problem. ...
    (microsoft.public.windowsxp.help_and_support)
  • SunBlade 150 Monitor Problems
    ... The workstation was ... working fine, and I didn't use it for a while (only accessing remote, not ... the monitor has an indication that it is on but when I ... Resolution settings are: ...
    (comp.sys.sun.misc)
  • SunBlade 150 Monitor problems
    ... The workstation was ... working fine, and I didn't use it for a while (only accessing remote, not on ... the monitor has an indication that it is on but when I ... Resolution settings are: ...
    (comp.sys.sun.hardware)