Re: Sunfire V240 server


Bhushan wrote:
> Hi All,
>
>
> i have Sunfire V240 server which i need to put it in a rack. and Also i
>
> need to connect that server to KVM switch. As there is no Keyborad and
> monitor came with the server. Please suggest how can i connect it KVM
> switch.
>
>
> Thanks and Regards,
> Bhushan

Hi,

I am using the Avocent Switchwiew-USB KVM switch in my Desktop
setup
to switch between the PC and the SunBlade 1500 . I am using the
SUN type 5 USB keybord and USB mouse for both PC & Sunblade.

You did not get a keybord or mouse with the server because you did
not
order the country kit !

You will also need an XVR-100 graphics card in the V240 to make
it
produce a VGA signal for you VGA screen.

SUN servers is not default populated with KVM as it is not needed.
you can always setup Xwindows or Xwindows over VNC from a PC
if you need to do graphic systems management on the system.

Xvnc server is included on the Solaris Companion CD.

//Lars

.

Relevant Pages

  • Re: ConnectComputer Problem
    ... I'm a little confused by your network configuration. ... Switch2 --- SBS Server ... switch has internet access all the time, the second switch has the client ... NICs ...
    (microsoft.public.windows.server.sbs)
  • Re: RDP Connections - Freeze or Reconnect
    ... I immediately swapped the connector and cable out and plugged the cable coming out of the switch into the spare 100mb NIC adapter but still using the connector and extra cable. ... The connection of the 100mb LAN from then on appeared much more stable. ... If I logon and test the RDP connection with a dialup modem through RRAS (Terminal server is also a RAS Server), would you expect it to misbehave if it was I switch problem? ... You mentioned seeing a red X on the server's network connection in an earlier post. ...
    (microsoft.public.windows.terminal_services)
  • Re: DNS Issue(s)
    ... My junk pile has an HP Procurve 12 port switch. ... defragging ancient workstations and the server. ... If a workstation cannot see the server then it cannot resolve a dns ... Find this server's Active Directory replication partners that run the DNS ...
    (microsoft.public.windows.server.sbs)
  • Re: POWWER5 550 & HMC
    ... I want to order a 4X550 Rack mount server, I want to manage them from ... Flat panel + KVM switch), so, is this possible? ... Subject: POWWER5 550 & HMC ...
    (AIX-L)
  • Re: Active Directory New Site
    ... the networks, new subnet object, new site then configure DFS. ... the same server room, appearing to AD as though its remote. ... Switch w/ Replica DFS Store" is a working model or will it just go down like ... VLAN and then physically link into that VLAN somehow? ...
    (microsoft.public.windows.server.active_directory)