Re: nubie looking for external scsi cd drive for sparc10



peter <pm3e@xxxxxxxx> writes:
i was given a couple sparc 10's and a sparc 5 but no password and no cd
drive so getting into the machine is impossible.

anyone have a spare drive to sell/barter/give?

What kind of Sparc10? They've used that designation for a few systems.
If its an Ultrasparc 10 and an Ultrasparc 5, both of those take IDE
CD-ROM drives, same as a PC. Those are a dime a dozen now?

If its a Sparcstation 10, then yes you'd need a SCSI sun bootable
CD-ROM, or another one to netboot off of. But even so, thats like a $1
on eBay. Go for Pioneer or Plextor. Both of them typically had a
jumper to select 512 byte block mode. I found a few Sun external ones
for $5 on eBay. Searching for SCSI CD-ROM gave 477 hits?
.



Relevant Pages

  • Re: nubie looking for external scsi cd drive for sparc10
    ... CD-ROM, or another one to netboot off of. ... Searching for SCSI CD-ROM gave 477 hits? ... Tape drives were typically set to SCSI-ID 4 and SCSI-ID 5. ... will require a password to boot from the CD-ROM. ...
    (comp.sys.sun.hardware)
  • Re: CD-ROM read fails. Recovery is impossible.
    ... > CD-ROM media is second only to diskettes as being prone to errors. ... the disk as possible, both with a custom 2.4.20 for k7 and other 2.4.x ... Dirty lens on the pickup head. ... Drives are usually designed to place several ...
    (Debian-User)
  • Re: Slow Install -- OS/2 Warp 4
    ... You can create a bootable installation CD... ... Installing OS/2 Warp Using the Internal CD-ROM and Diskette Drive ... Open the OS/2 System folder; then open the Drives folder. ...
    (comp.os.os2.setup.misc)
  • Re: FIXMBR Redux
    ... Andrew, ... I have an OEM machine and no genuine CD-ROM. ... in both CD-ROM drives. ... It's all there, what XCOPY copied.....but I've ...
    (microsoft.public.windowsxp.basics)
  • Re: Upper Lower Filters in XP Registry
    ... > Fix HDD in master may not be detected while CD-ROM connects to slave. ... >> drives with nothing, ... Just remove it from the Drivers File? ...
    (microsoft.public.win2000.registry)