Re: Gigabit NIC for Sun Blade 100?
- From: Doug McIntyre <merlyn@xxxxxxxxx>
- Date: 24 Dec 2006 16:07:29 GMT
"llothar" <llothar@xxxxxx> writes:
Michael Hoffmann schrieb:
llothar wrote:
Thats why i wouldn't buy this 20 Euro Card. A Sysconnect is around 60
Euro.
I'm almost convinced to get a Syskonnect card - except they seem to be a
bitch to get in Australia. I've found the PCI-E, the PCI-X, the PCI-64
versions, but not the PCI-32 one.
I don't think that there is a special PCI-32 but you can put a PCI-64
card in any PCI slot.
Or is there no room for a long 64bit Card in the Blade 100?
There's plenty of room. I have a 64-bit PCI SunSwift card in my Blade 100.
It just doesn't use the 64-bit-ness having the card edge hang over.
.
- Follow-Ups:
- Re: Gigabit NIC for Sun Blade 100?
- From: Michael Hoffmann
- Re: Gigabit NIC for Sun Blade 100?
- References:
- Gigabit NIC for Sun Blade 100?
- From: Michael Hoffmann
- Re: Gigabit NIC for Sun Blade 100?
- From: Rich Teer
- Re: Gigabit NIC for Sun Blade 100?
- From: llothar
- Re: Gigabit NIC for Sun Blade 100?
- From: Michael Hoffmann
- Re: Gigabit NIC for Sun Blade 100?
- From: llothar
- Re: Gigabit NIC for Sun Blade 100?
- From: Michael Hoffmann
- Re: Gigabit NIC for Sun Blade 100?
- From: llothar
- Gigabit NIC for Sun Blade 100?
- Prev by Date: Re: terminal problem on SunOS 4.X
- Next by Date: prtconf command for memory
- Previous by thread: Re: Gigabit NIC for Sun Blade 100?
- Next by thread: Re: Gigabit NIC for Sun Blade 100?
- Index(es):
Relevant Pages
|
|