Sun HD50 'Regulated' SCSI Terminator Question!

Hi All,

I have a couple of left over HD50 'Regulated' SCSI terminators, part
number 150-1785-02. I used one on my PC to terminate a Adaptec 39160
50 pin chain, no devices attached but Adaptec recommends to terminate
the chain. Once I pluged the Sun terminator into the HD50 (internal
50 pin to external HD50 cable) connector it caused lots of problems.
It down graded my 160 drives to 40 and it keeps locking up the SCSI
scan process to the point that I can not boot at all or I am able to
boot but the SCSI chain would lock up during or after the boot process
anyway.

My question, before I spend any more money, is there a difference
between the Sun terminator and a regular Active SCSI terminator? If I
buy a different brand will it make a difference?


Thanks for any help,

Charles

.

Relevant Pages

  • Re: Sun HD50 Regulated SCSI Terminator Question!
    ... I have a couple of left over HD50 'Regulated' SCSI terminators, ... between the Sun terminator and a regular Active SCSI terminator? ...
    (comp.sys.sun.hardware)
  • Re: Installation Woes - Update - AMD 64 MB Recommendation??
    ... I have now ordered a proper SCSI ... Ultra320 cable with terminator. ... I am not sure whether the 50 pin and 68 pin busses are isolated or ... they were not (an adaptec controller) and my ...
    (comp.os.os2.setup.misc)
  • OT: Mixing SCSI devices on a single channel.
    ... I have an external HP SureStore DLT VS80 with a SCSI LVD/SE 68 pin ... using the 50 Pin Centronics style terminator. ... I can get the system to boot ... and the system can access which ever drive is attached to the host. ...
    (comp.sys.hp.mpe)
  • Guess the next Stern 09 title!
    ... MOVIE for the next pin on the roster. ... Terminator 4: Terminator has been a pinball staple, ... the first in a new film series makes me think this is unlikely...Stern ...
    (rec.games.pinball)
  • Re: Sun HD50 Regulated SCSI Terminator Question!
    ... I try to use the HD50 connector for devices, ... between the Sun terminator and a regular Active SCSI terminator? ... If you have no devices on that port, then leave it alone. ...
    (comp.sys.sun.hardware)