Re: spamd/razor2 communication

From: S. Anthony Sequeira (tony_at_sequeira.com)
Date: 01/27/04

  • Next message: Steve Birchfield: "Telnet Scripts"
    Date: Tue, 27 Jan 2004 21:31:26 +0000
    
    

    On Tue, 27 Jan 2004 08:38:29 -0800, Doug Freyburger penned:

    > S. Anthony Sequeira wrote:
    >>
    >> my $objects = $rc->prepare_objects( \@msg )
    >> or die "error in prepare_objects";
    >> 409 --> $rc->get_server_info() or die $rc->errprefix("checkit");
    >>
    >> which, to me, means it cannot contact the server, which is more or less
    >> what I gathered from the spamd message anyway.
    >
    > "transport endpoint not connected" message associated with a
    > get_server_info() call sure does look like server access is blocked. That
    > isn't certain because the cited line number can be a few off, which is why
    > you quoted the stuff above it for one semicolon back. It also could be a
    > failure in the stuff that set the server information structures that
    > didn't trigger a failure then.
    >
    >> I'm wondering whether it could be ADSL modem/router related, as about
    >> the only thing I recall changing at the time it started was upgrading
    >> the firmware.
    >
    > Sounds like it. Any idea what server information the get_server_info()
    > call retrieves? If the firmware blocks a port now, that would be it.

    I haven't looked at the code in any detail yet.

    The thing is, it's an intermittent error. I would expect a blocked port
    to raise this error consistently, or am I indulging in woolly thinking?
     
    There are a couple of things about this firmware release that make me
    think it's dodgy. I was complaining about the modem regularly dropping
    and regaining it's DNS connections, evidenced by the logs. This release
    has either cured this or suppressed the message in the logs.

    I'm trying to get hold of the previous firmware to see whether it is a
    cure. Life's short and the list of things to do is long. Enough sob
    stories.

    Thanks

    -- 
    Tony
    

  • Next message: Steve Birchfield: "Telnet Scripts"

    Relevant Pages

    • Problems with G4 400 Sawtooth - any experts able to assist ?
      ... up as a server/backup machine for my home network. ... A futher issue is that software update suggests I update the firmware ... What is the cause of the startup errors - can I fix them ... Any other hints about running an old G4 as a file server? ...
      (uk.comp.sys.mac)
    • Re: Problems with G4 400 Sawtooth - any experts able to assist ?
      ... a couple of new large SATA HDD on a SATA pci card as a mirrored RAID ... A futher issue is that software update suggests I update the firmware ... Any other hints about running an old G4 as a file server? ...
      (uk.comp.sys.mac)
    • Re: A convert to Apple says thanks
      ... > you have to find eachother through the server though. ... >> the iBook actually does support CCMP/AES encryption? ... >> Is there a nice GUI newsreader supplied preinstalled with MacOS? ... You can often find unofficial firmware ...
      (uk.comp.sys.mac)
    • Re: vpn tunnel endet nach 4 Minuten
      ... gibt es ja schon eine neuere Firmware. ... Gruß ... "Alexander de Boitte" schrieb im Newsbeitrag ... >> [MVP ISA Server] ...
      (microsoft.public.de.german.isaserver)
    • Re: PEAP problems with MS W 2K Server IAS +Avaya AP-3 + Proxim AP-2000
      ... Sounds like a firmware issue, update to the latest firmware that might help ... > in fact I think it?s the same HW + SW)> * IAS radius running on W2K server with an Active Directory PDC service in> the same PC. ... The error varies from:> * DHCP server not getting the DHCP request (if you fix the IP address then> you have connectivity) ...
      (microsoft.public.internet.radius)