Re: 43P-150 will not boot from CD
From: Jan Rypdal (no.spam@home.com)
Date: 04/03/03
- Next message: Sirko Krauskopf: "Re: 43P-150 hangs during startup, code 517"
- Previous message: Piotrek Kapczuk: "Re: ping debugging"
- In reply to: Annette Teutschl: "Re: 43P-150 will not boot from CD"
- Next in thread: Jochen Luebbers: "Re: 43P-150 will not boot from CD"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
From: "Jan Rypdal" <no.spam@home.com> Date: Thu, 3 Apr 2003 13:46:10 +0200
Hi Annette,
The problem is that I cannot get the server up & running at all, due to a
hang situation during boot. I am therefore unable to get into SMS or
anything, and need to either start SMS by F1 or reinstall from the CD by
pressing F5. Neither works, and the server is dead meat.
Regards,
Jan
PS. Nope, Norway. Not too far from Sweden, though...
"Annette Teutschl" <annette@ita.dmz.at> wrote in message
news:b6h2t3$o2o$1@leech.it-austria.net...
> Hi Jan!
>
> Sorry, I think you missunderstood me, I mean have a look at the bootlist,
> to see if the server will boot from CD. You can also use "diag"
> select "Task Selection"...there is an entry: "Display or Change bootlist"
> after this you can choose "normal mode", look first in "Display current
> bootlist" if the cd is after the hdisk0, you must change it with "alter
> current bootlist" You can also made this on commandline: see also "man
> bootlist"...
>
> Some personal question: Are you from Sweden?
>
> Good luck
>
> Annette
>
>
>
> "Jan Rypdal" <no.spam@home.com> schrieb im Newsbeitrag
> news:7mTia.855$b71.22136@news4.e.nsc.no...
>> Hi Annette,
>>
>> I have also tried the ASCII keys (1,4,5,6) without any luck. To my
>> knowledge, I never customized the bootlist, but just to be sure, I took
>> out the battery to reset the bootlist etc. No luck.
>>
>> Seems I'm stuck in a catch 22; after the failed upgrade from base 5L to
>> ML3 the boot stops in 517, and I am unable to rebuild the system since I
>> cannot boot from the CD or diskette, or get SMS running.
>>
>> Maybe this means a visit to the friendly IBM service shop?
>>
>> Regards,
>> Jan
>>
>>
>> "Annette Teutschl" <annette@ita.dmz.at> wrote in message
>> news:b6gp0q$i5n$1@leech.it-austria.net...
>>> Hi Jan!
>>>
>>> Instead of F1, F5 or F6 try just 1, 4, 5 or 6 sometimes this will work.
>>> Does the system runs now? Maybe you also check the bootlist...
>>>
>>> Regards
>>>
>>> Annette
>>>
>>>
>>> "Jan Rypdal" <no.spam@home.com> schrieb im Newsbeitrag
>>> news:mOCia.584$b71.6526@news4.e.nsc.no...
>>>> I have a problem with system boot which might require a fresh install.
>>>>
>>>> However, I cannot get the system to boot from the CD. I've tried F5, F6
>>>> and F1, but no reaction on any of these. This problem was there present
>>>> before I now got the boot problem, so they should not be related.
>>>>
>>>> When the system was up & running, there was no problems with the CD or
>>>> the keyboard.
>>>>
>>>> Any ideas??
>>>>
>>>> Regards,
>>>> Jan
- Next message: Sirko Krauskopf: "Re: 43P-150 hangs during startup, code 517"
- Previous message: Piotrek Kapczuk: "Re: ping debugging"
- In reply to: Annette Teutschl: "Re: 43P-150 will not boot from CD"
- Next in thread: Jochen Luebbers: "Re: 43P-150 will not boot from CD"
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]
Relevant Pages
|
|
